Author Topic: Twin coil - what the hell????  (Read 12099 times)

0 Members and 1 Guest are viewing this topic.

Jan-in-UK

  • Super Member
  • ***
  • Posts: 533
  • Karma: 5
Twin coil - what the hell????
« on: June 25, 2010, 08:33:58 PM »
Story goes - we fired up my brand new engine inside the green one - lovely sound, runs sweet and everything was superb. Then I switched it off to proceed with the other jobs but I left ignition ON and after more or less 2h coil started to make strange sounds :) and melting itself :D

So ok, coil f***d I thought. I got hold of a new one, put wires the same way, NOTHING else was changed. And it does NOT start up what so ever. Obviously gets flooded every single trial. Checked cables 3 times, everywhere..... WHY?????

IS THERE ANYTHING ELSE WHICH GOES "BYE BYE" TOGETHER WITH BLOWN COIL?????? I will get crazy, co close to completion.
Such a thing as Fiat 126p will never happen again to this planet... Love it.
www.fsoclub.co.uk

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Twin coil - what the hell????
« Reply #1 on: June 25, 2010, 09:30:42 PM »
Check the points are opening and closing they can weld themselves together.
Swap the condenser.
check the fuses.
Pete.      il cavallo piccolo

Jan-in-UK

  • Super Member
  • ***
  • Posts: 533
  • Karma: 5
Re: Twin coil - what the hell????
« Reply #2 on: June 25, 2010, 09:31:34 PM »
Will do. Fuses are ok, so maybe one of other two issues :(
Such a thing as Fiat 126p will never happen again to this planet... Love it.
www.fsoclub.co.uk

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Twin coil - what the hell????
« Reply #3 on: June 25, 2010, 09:39:23 PM »
Also if you have a multimeter or a circuit tester check you have 12v on the + side of the coil. its not unknown for it to take out the the wire to the ignition switch.
Pete.      il cavallo piccolo

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Twin coil - what the hell????
« Reply #4 on: June 25, 2010, 11:47:07 PM »
the +12v to the coil is fine, but we werent able to stick another condenser on it. That was my first thought. ?Didn't think about the points welding themselves, good idea
Rust does not discriminate

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Twin coil - what the hell????
« Reply #5 on: June 30, 2010, 10:19:22 PM »
I gave Jan a help with this earlier, and I'm baffled!
I drove to his in my 500, then removed my coil (wasted spark), distributor, condenser and plug leads and put them on Jan's 126 - No spark!!
I also checked the plugs, then ran a jump lead from the +ve side of the coil to the battery, and the coil mount to the -ve, still no joy.
I cannot figure out whats wrong since all the parts work when they're fitted to mine!!!

Any ideas would be a big help!!
Rust does not discriminate

Jan-in-UK

  • Super Member
  • ***
  • Posts: 533
  • Karma: 5
Re: Twin coil - what the hell????
« Reply #6 on: June 30, 2010, 10:41:22 PM »
I can only confirm I am getting grey haired as well and it would be really great help if someone would come up with idea what is wrong  :rant:
Such a thing as Fiat 126p will never happen again to this planet... Love it.
www.fsoclub.co.uk

rmbruton

  • Super Member
  • ***
  • Posts: 125
  • Karma: 1
  • before
Re: Twin coil - what the hell????
« Reply #7 on: June 30, 2010, 10:46:58 PM »
could it be a break in the wiring harness?

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Twin coil - what the hell????
« Reply #8 on: June 30, 2010, 10:48:53 PM »
this may sound stupid but when you refitted the coil did you make sure that the point of contact with the body has a good earth?

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Twin coil - what the hell????
« Reply #9 on: June 30, 2010, 10:52:38 PM »
I was checking the multimeter from the +ve of the coil through to the block, so it must have been earthed ok, but just to confirm, the last test involved connecting the coil earth to the -ve battery terminal and the +ve coil to the +ve of the battery as I figured this would pick up on any dodgy earth or corroded wires
Rust does not discriminate

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Twin coil - what the hell????
« Reply #10 on: June 30, 2010, 11:48:42 PM »
Have you checked the wire from the coil to the distributor ???
Pete.      il cavallo piccolo

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Twin coil - what the hell????
« Reply #11 on: June 30, 2010, 11:52:09 PM »
I made up a new one, then checked for open/closed circuit while turning the engine and it all seemed in order!
Rust does not discriminate

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Twin coil - what the hell????
« Reply #12 on: July 01, 2010, 12:16:06 AM »
Thats a puzzle. so the distributor cam is rotating with the engine, Have you tried measuring from earth to the points or do the points spark when you flick them ???
Pete.      il cavallo piccolo

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Twin coil - what the hell????
« Reply #13 on: July 01, 2010, 07:00:27 PM »
Reading from the start of the thread it states that the coil got cooked after the ignition was left on i can only assume that there is some part of the loom that has given up due to this?   

Jan-in-UK

  • Super Member
  • ***
  • Posts: 533
  • Karma: 5
Re: Twin coil - what the hell????
« Reply #14 on: July 01, 2010, 08:35:26 PM »
All parts of the loom, high voltage leads and all mechanical parts were taken off michael 500 - still doesnt work. As michael said we even put battery voltage strait to the coil without loom on the way!! I am getting slightly angry  .:)
Such a thing as Fiat 126p will never happen again to this planet... Love it.
www.fsoclub.co.uk