Author Topic: Guido the Fiat  (Read 87686 times)

0 Members and 1 Guest are viewing this topic.

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Guido the Fiat
« Reply #90 on: August 08, 2008, 01:00:07 PM »
Check the rod length and the spacer on your fuel pump.
Mine kept stopping when it got hot and it turned out to be nothing wrong with the pump, the rod somehow stops pushing the pump when it gets hot.
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #91 on: August 08, 2008, 01:31:19 PM »
i replaced the pump, and it solved the problem. it wasnt all that expensive so im happy with knowing it wont fail again... :D
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #92 on: September 03, 2008, 04:25:50 PM »
Next week i plan to do some waxoyling on my car, i plan to clean, paint (hammerite) and protect the whole underside of my bis. so i was just wondering are there any really weak spots that i should pay special attention to, or is it just a simple job of brushing as much of that stuff as possible on the car? thanx. ;)
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Guido the Fiat
« Reply #93 on: September 03, 2008, 09:58:06 PM »
Inner wings, around the mounts. Under all of the front mainly where the spare wheel sits and battery sits. Inside the bottom of the doors. the sills.....................................................

Oh my god it looks like the whole car :lol:

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Guido the Fiat
« Reply #94 on: September 04, 2008, 12:06:05 AM »
and dont forget to use eye protection hammerite in the eyes is most unpleasent I know!!!!
one resprayed and another arrives- double trouble BIS style!!

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #95 on: September 04, 2008, 07:38:25 AM »
Quote from: "dajwid"
Oh my god it looks like the whole car :lol:


Certanly does...  :shock:  :D

Cheers guys, i have a military gas mask for spraying s i should be fine...  :smt004
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #96 on: September 16, 2008, 06:56:24 PM »
Just installed a remote controlled central locking system on my Bis, must say its a great feeling to be able to lock your car from a distance....  :D  :D
The whole kit costed me some 30pounds and about 4hours of work...
(will post pics soon :wink: )
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #97 on: September 18, 2008, 05:18:04 PM »
well about that central lock... here it is... :D

http://www.youtube.com/watch?v=TCaNsNdyp-0

the whole kit (2 remotes, 4 el motors, central unit and some screws and bolts.... need only 2 motors so got 2 spares :) )



the drivers side door fitted with the main motor, which controls the others...



the little plug in the front boot served es an entrance point for the wires...



other than that i just wired the thing up to the battery and grounded it....



the indicators arent connected so they flash when the lock is operated but i intend to wire them up somehow...
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Guido the Fiat
« Reply #98 on: September 18, 2008, 08:44:43 PM »
The 2 sparesare for the bonnet and boot :-)
  Loose those locks :shock:

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #99 on: September 19, 2008, 06:08:49 AM »
Quote from: "dajwid"
The 2 sparesare for the bonnet and boot :-)
  Loose those locks :shock:


the remotes have only 2 buttons so if i put one on the bonnet it would open ewery time i unlocked the car, dont want that....
the rear lock is different than the rest, the whole cylinder rotates when unlocked so its impossible to use this system to unlock it....
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #100 on: October 04, 2008, 09:12:51 AM »
Just found myself 4 nice cheap alloys for my bis. They are original Koral's for a Yugo, and fit straight on. The man told me to pay him what i want, he just wants to get rid of em cos they are collecting dust in the garage. I plan to re spray them in white and put the lowest possible profile tires on em...



here they are in white on a red Yugo... looks nice...



okay, they're not oz superturismos or something like that, but for 30pounds they look decent... (i found 4 cromodoras in Croatia, nicely repaired with tires and all, but they costed 300pounds, which is three times the worth of my car...) :???:

gimme your opinions please... :wink:
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Guido the Fiat
« Reply #101 on: October 04, 2008, 08:47:44 PM »
have you a rear wiper still? if you havent you can use the wiring for that to open your boot its what I did with one of my spare solenoids...
one resprayed and another arrives- double trouble BIS style!!

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #102 on: October 04, 2008, 09:53:26 PM »
no mate, dont have the rear wiper, my cheap eastern-european-people-dont-need-them version 126 never had em...  :???: plus i dont want my doors to pop up any more, im just happy with remote locking/unlocking. Currently trying to connect the signal lights to the lock system so it blinks when i operate it... :cool:
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #103 on: October 05, 2008, 05:56:29 PM »
Well here they finaly are, my wery first set of alloy wheels, not in a brand new condition but after some work they end up looking something like this...
:D  :D





PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Guido the Fiat
« Reply #104 on: October 08, 2008, 03:43:55 PM »
Here are my new alloys fitted...



and this is what theyll look like when resprayed, well that, plus lower/wider tires, plus yellow brake drums...



And a bigger one...

PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/