Author Topic: Progress...  (Read 8058 times)

0 Members and 1 Guest are viewing this topic.

Kent126

  • Super Member
  • ***
  • Posts: 955
  • Karma: 5
  • Closer every day to getting on the road....
    • Facebook Profile
  • Location: Dorset, UK
Progress...
« on: November 18, 2010, 02:41:47 PM »
Finally making some progress. All the bits have arrived now so I have fitted;

new plugs,
leads,
earth strap,
condensor,
distributor cap,
rotor arm,
igntion coil,

He is now in the garage having the new starter motor, cable and fuel pump rod fitted. With any luck the next couple of days will see me back on the road again. Then I can start work on stripping out the interior and giving everything a bloody damn good clean.



Can't wait, because getting the train to work is doing my bloody head in!

Tom
« Last Edit: December 11, 2010, 10:36:25 PM by Kent126 »
1974 Italian Fiat 126 TA
1996 Fiat Cinquecento Sporting
2008 Fiat Panda 100HP

stobart16gears

  • Member
  • *
  • Posts: 25
  • Karma: 0
Re: Progress...
« Reply #1 on: November 18, 2010, 04:00:42 PM »
All your progress will benefit the small car in a big way. Ive just had a new condensor, points and plugs, and it feels more alive to drive  [-/

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Progress...
« Reply #2 on: November 18, 2010, 04:12:57 PM »
Because the 126 carpet comes in a number of sections I used to just put them in the washing machine and they used to come up a treat  [-/
Can't do it with the one piece 500 one  :(

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Progress...
« Reply #3 on: November 18, 2010, 05:46:19 PM »
that mechanic looks like he is visiting a museum! or where the computer is meant to plug in for fault finding!

Kent126

  • Super Member
  • ***
  • Posts: 955
  • Karma: 5
  • Closer every day to getting on the road....
    • Facebook Profile
  • Location: Dorset, UK
Re: Progress...
« Reply #4 on: November 18, 2010, 05:50:14 PM »
Wow! Washing machine? Awesome. Will do that when my flatmate is at work! ha ha. Seriously though? I will give that a go, gotta be worth a try. Reckon you could do the same with the seat covers?

and yeh the mechanic did stand there scratching his head for a while, before saying "Bob, you worked on one of these before?"

All worth it considering I went rolling down a massive hill to bumpstart it, and played chicken with a double decker bus, and WON!

Fun times

Tom
1974 Italian Fiat 126 TA
1996 Fiat Cinquecento Sporting
2008 Fiat Panda 100HP

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Progress...
« Reply #5 on: November 18, 2010, 06:34:08 PM »
that mechanic looks like he is visiting a museum! or where the computer is meant to plug in for fault finding!

That was the impression i had when i saw that pic  :P
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Progress...
« Reply #6 on: November 18, 2010, 07:13:11 PM »
 :D I reckon that picture would make for a good caption competition  [-/

I would go with     "Bob have a look at the size of the heater on this little car"   :oops:

Seat covers & washing machine  ::) Well I think that would depend upon the material & condition. Vynl OK but probably a lot of work to remove & refit. A lot of the fabric seat covers are a bit fragile also.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Progress...
« Reply #7 on: November 18, 2010, 07:39:46 PM »
Mine are going in the machine this weekend, first to was then to dye them black again as they were many years ago. Will it work?

No idea at all.

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Progress...
« Reply #8 on: November 18, 2010, 10:02:07 PM »
just make sure you get a dye that is colour fast.

Kent126

  • Super Member
  • ***
  • Posts: 955
  • Karma: 5
  • Closer every day to getting on the road....
    • Facebook Profile
  • Location: Dorset, UK
Re: Progress...
« Reply #9 on: November 19, 2010, 05:00:09 PM »
Well finally got the car back from the garage just over an hour ago. New starter motor, cable and fuel pump rod fitted. Car is now running like a beaut! Will be able to use it for work tomorrow morning for the first time since getting it!

I think its gonna be bloody cold too!

Anyway, on with the project. Next is stripping out all the interior for a damn good clean!

Tom
1974 Italian Fiat 126 TA
1996 Fiat Cinquecento Sporting
2008 Fiat Panda 100HP

skelz

  • Super Member
  • ***
  • Posts: 183
  • Karma: 0
Re: Progress...
« Reply #10 on: November 20, 2010, 07:17:13 AM »
noticed the UK models have black plastic vent on engine door grid .. seen here on original post .. did these come as stock ? do aid in the intake of air... havent seen oz nikis with them

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Progress...
« Reply #11 on: November 20, 2010, 08:01:10 AM »
The vent covers are an aftermarket thing and their main function is to keep rain & snow out of the engine bay . There are a couple of types , the early ones were like a flat rubber grid with a slider to open & close the vents. Later ones are like a hard plastic scoop  [-/

Kent126

  • Super Member
  • ***
  • Posts: 955
  • Karma: 5
  • Closer every day to getting on the road....
    • Facebook Profile
  • Location: Dorset, UK
Re: Progress...
« Reply #12 on: November 20, 2010, 08:11:47 PM »
Got mine off eBay from Ricambio. Dont like them personally, but due to keeping the car outside, and the impending rain and snow I had no choice. Getting my garage back when I move back to Tunbridge Wells in January, so might take them off as I park in a enclosed carpark at work. Here they are fitted, two screws, simple as that! [-/





Tom
« Last Edit: December 11, 2010, 10:37:33 PM by Kent126 »
1974 Italian Fiat 126 TA
1996 Fiat Cinquecento Sporting
2008 Fiat Panda 100HP

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Progress...
« Reply #13 on: November 20, 2010, 09:24:10 PM »
 Hey Tom when you down this way again, you`ll have to came over. By that time I should have a 126 again. There are currently two 126s whizzing around TW on regular bases.
 I think those engine covers could be a bit taller. Can`t imagine there is much hot air escaping through them, which shouldn`t be a problem in winter.
1972 Fiat 500
1980 Fiat 126

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Progress...
« Reply #14 on: November 20, 2010, 10:01:03 PM »
Dont try the washing machine thing on original 126 fabric seat covers.

I tried it once....the cover didnt survive :(
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)