Author Topic: I'm over-heating :(  (Read 5418 times)

0 Members and 1 Guest are viewing this topic.

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
I'm over-heating :(
« on: May 14, 2010, 08:58:23 AM »
I've come to the conclusion my air-cooled over-heats.

I've tried all variations of ignition timing, the big hose is in place, the fanr seems ok.
Now my timing light has quit on me :(

Any ideas? I thought it was a carb thing but changing the carb hasnt helped.

It starts to 'pink' up hills when she gets too hot and she looses power :(

any ideas?
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: I'm over-heating :(
« Reply #1 on: May 14, 2010, 09:15:45 AM »
 Are you running the standard, or electronic ignition?
1972 Fiat 500
1980 Fiat 126

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #2 on: May 14, 2010, 09:51:04 AM »
Electronic ignition
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Re: I'm over-heating :(
« Reply #3 on: May 14, 2010, 10:01:49 AM »
is the thermostat working ok?

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #4 on: May 14, 2010, 10:12:30 AM »
I took it off completely, because I thought maybe it was sticky :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: I'm over-heating :(
« Reply #5 on: May 14, 2010, 12:26:29 PM »
 I would try a standard distributor and see if it helps. I had so many problems with my electronic ignition, I can`t be bothered with it any more, and gone back to good old points.
1972 Fiat 500
1980 Fiat 126

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #6 on: May 14, 2010, 12:30:10 PM »
I am beginning to wonder if you are right because I never had too many problems on points either :-
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #7 on: May 14, 2010, 12:33:01 PM »
Seems the oil light issue is associated with this over heating because it only come-on when it is too hot, which kinda makes sense... :(
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #8 on: May 14, 2010, 02:54:42 PM »
In the 123 ignition handbook it says use curve 0 or 1 for the standard 500/650

It also says maximum advance is 28 degrees at 3000 rpm

Acording to my 126 handbook it ways static is 10 degrees, and centrifugal is 21 degrees

So now I'm confused

Does that mean standard they advanced 31 degrees? or is that a maximum of 21 degrees

In either case the numbers don't match so I'm thinking Mr 123 has a trick up his sleeve I dont know about :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #9 on: May 14, 2010, 03:40:29 PM »
Where's that thread on setting valve clearances? :oops:

It's ok found the manual in the subscribers downloads :)
« Last Edit: May 14, 2010, 03:53:08 PM by Darrell »
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: I'm over-heating :(
« Reply #10 on: May 15, 2010, 06:37:06 PM »
have you checked that your fan is not bent up as the blades can be bent and stops it from working 100% also make sure that the deflector is inside the tin work as if that is missing it will not guide the air correctly to the head the only time i have had any problems with over heating on an aircooled is due to the fan not turning properly.
you do mention that your oil light comes on is this straight away or after a while as it could be that the oil pump is not pushing oil around and the heat is coming from this?

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #11 on: May 17, 2010, 09:20:09 AM »
I had alot of it apart this weekend, thought I'd check the fan and that seems fine and spinning the altenator by hand it is free and unobstructed, all blades in place. The deflector is in place. I've welded-up the hole where the air cleaner was.

The oil light only comes-on when it is hot (running for a while)

I checked the carb joint and that seems good so don't think she's running lean.

I tried different curves on the 123 ignition, but no matter which one I use, it ends-up in the same result, oil light on and pinking up hills.

I am beginning to suspect lubrication and will strip it completely this weekend, check bearings and oil pump :(
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #12 on: May 17, 2010, 10:34:09 AM »
Extract from a VW forum:

vw engines were designed to run on unleaded from very early on inthe 70s - I remember having my Bay and every Tom Dick and 'Arry was trying to sell the latest lead replacement gadget to unsuspecting VW owners.

The main issues was how hard the metal used to make the valves was. If you wanted to, you could replace your valves (or the whole cylinder head) so that the valves were made of a more hardened metal. Also, the unleaded fuel combusted at a slightly different moment compared to leaded, so adjusting timing would help this - avoiding pinking.

By the 80's I think all cars were able to run on unleaded without any issues.

I wonder if not running an unleaded head could be the problem? :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: I'm over-heating :(
« Reply #13 on: May 17, 2010, 12:47:24 PM »
I had a similar problem with pinking, having installed a 123 ignition.  Set the engine up as described inserted the new 123 distributor, set it till the green light just went out.  All seemed ok at first, then would not tickover and driving at 30mph with Kangaroo petrol.  Finally checked the ignition timing all ok threw the strobe out of the garage and timed by listening, running a lot better.  Checked the timing usinig the strobe and the timing mark at tickover is 20 ish degrees before it should be, but the car is running well.  Still set on number 1 curve.  No problems with over heating or oil light comming on.

Ralph

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: I'm over-heating :(
« Reply #14 on: May 17, 2010, 01:15:52 PM »
On my way back from the allotment a little while ago I saw the Snap-on guy and bought another timing light...don't ask how much, but anyhow put it on and it was a little too advanced. The timing light has a knob on it to set the degrees of advance thus I assume one would be using the TDC mark and not the 10 degree mark if one were to set the knob to 10 degrees.

The idle seems a little slower now and did retard it a bit but the frightening thing was how far the ignition advances when reved.

I took the timing light over to about 60 degrees and thats kind of where it is when revved...seems way too far! :-X
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)