Author Topic: cams  (Read 20742 times)

0 Members and 1 Guest are viewing this topic.

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« on: June 01, 2006, 07:54:42 PM »
im looking for a fast road cam for my (slammed)mobile chess board,ive been let down by gerstl,and nanni ricambi do not answer emails.........and as for middle barton ripoff.,well...........so,does anyone sensible have a sensible suggestion for a supplier?...............................as usual,willing to swap fresh cooked (jersey) lobster for info :wink:
28-34c and cold beers in the fridge

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
cams
« Reply #1 on: June 01, 2006, 08:12:25 PM »
have you spoken to Dajwid? there must be loads kicking about in Poland!

how much does it cost to have the standard one sent away to be modified? can it even be done to a standard cam?


regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« Reply #2 on: June 01, 2006, 08:27:13 PM »
hi chris,yes they can be built up and reground and case hardened,but,i pulled engine down with gerstl promising a cam,only to wait 5 weeks for them to say it was unavailible.........................that was after they suggested the ''360 degree'' cam that i should order............
i just want something off the shelf that wont melt,Nanni are good,but they dont want my money.....have mailed and mailed,i want oil cooler and other stuff as well,but just cannot get a reply.......big stack of euros here waiting. :roll:
28-34c and cold beers in the fridge

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
cams
« Reply #3 on: June 01, 2006, 08:56:51 PM »
i realy cant understand these companies, is it they prefer local buyers? and cant be bothered to post? i cant get my head around it.

its going to be expensive to get the standard cam modified, so yer i think youre rigt aim for an off the shelf cam. Have you tried Ritz? they do tuning stuff too,  ive heard there very reliable, but never bought from them myself.

http://www.fiat600.net/

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
cams
« Reply #4 on: June 01, 2006, 08:57:40 PM »
Hi Dave, look ive appologised mate so lets leave it out eh?
I dont know for sure but i'd guess Kent cams  http://www.kentcams.com/  might be the people to try as they have done a cam for just about every car made at some point.
They will probably have to grind one fresh from an old or stock shaft but i guess you never know till you try.
Regards
Ross

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« Reply #5 on: June 01, 2006, 09:22:03 PM »
thanks Ross,i just assumed what with the prices they (nanni/gerstl)are asking they would at least want to sell something!.........im still looking for something ''off the shelf''.....at 200ish euro(just a 2cyl cam!) you would think nanni would answer my mails?.......and dont get me started on the oil cooler/converted timing cover prices!!!................i cannot it seems,spend my money,despite there ''worldwide postage'' claims.
28-34c and cold beers in the fridge

slammed 66

  • Super Member
  • ***
  • Posts: 126
  • Karma: 0
cams
« Reply #6 on: June 01, 2006, 09:27:47 PM »
Yeah, i can see how waiting 5 weeks for nothing could be frustrating :x
Not anyone in the states that could help?

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« Reply #7 on: June 01, 2006, 10:01:15 PM »
you are right Ross,im very pissed off, engine on the bench in bits........new bucket seats,rev counter,oil gauge etc fitted......all was timed (pardon the pun) to get car back on the road with carb reversal sorted,oil cooler and new cam.........and three weeks leave from work wasted........................................................1 week to go an no bits to fit. :twisted:
28-34c and cold beers in the fridge

hudsonhenry

  • Super Member
  • ***
  • Posts: 303
  • Karma: 1
    • http://www.retro500.com
cams
« Reply #8 on: June 01, 2006, 10:54:31 PM »
Dave

Have you tried Ruud?

I have a 40/80 cam which I can highly reccomend

Nigel
http://www.retro500.com the site dedicated to modified Fiat 500's

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
cams
« Reply #9 on: June 02, 2006, 07:16:37 AM »
Hi a brand new one is 8 pounds un modified.

http://allegro.pl/item106339799_walek_rozrzadu_fiat_126p_elegant_nowy_okazja_.html

 A company near my school does this type of work, what is it you want done and I will ask them for a quote.

I'm pretty sure you will get plent of change out of your 200 Euros :lol:

A friend has an oil cooler for a 126 too used but for a very short time if you are interested.

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
cams
« Reply #10 on: June 02, 2006, 07:45:53 AM »

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« Reply #11 on: June 02, 2006, 07:53:12 AM »
hi Nigel,well,ruud has been very slow as well,brakes (paid for) still waiting.............some 5 weeks later,remember the post? i paid thet week..........all i get is dutch language email saying back on 6th june!!!!

nanni have a great 40-80 with timing chain/gears,already (aparently)dialed in,i dont fancy elongating the holes and welding myself......article 0404f

david (poland).if that oil cooler has the modded timing chain cover with oil filter cartridge id def be interested...even polish ACM racing do not answer mails......i've even switched off my mail washer just in case they were being pinged!!

Chris,have mailed ritz.lets see if they can be bothered to take a 600ish euro order eh?
28-34c and cold beers in the fridge

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
cams
« Reply #12 on: June 02, 2006, 09:05:47 AM »
Ruud are not very reliable, they asked me to get parts for them here then I had a huge job getting in touch with them again.

Oil cooler can be seen here.
http://allegro.pl/item105279328_chlodnica_oleju_wraz_z_filtrem_do_mocnego_126p.html
It is about 75pounds.

A modified cam is about 40pounds

126dave

  • Super Member
  • ***
  • Posts: 1534
  • Karma: 2
cams
« Reply #13 on: June 02, 2006, 03:50:15 PM »
hi david,i checked that cooler out,it looks just a remote oil filter to me?,think i'll give it a miss.but,can you get standard rear and front rubber engine mounts and engine gasket sets cheap david? if so i would take 2 gasket sets and i complete engine mount rubber set.can forward funds to you by paypal or whatever you want if you can do that

Chris,ritz got back to me.....500euro :shock:  for oil cooler kit,cash up front before they MAKE it!!!!????????.

anyhow,i've taken the plunge an ordered from nanni.....im hopeing that 634euro :shock:  order might wake them up :roll: .
last big order .......................lets hope the car is back on the road this year!!
28-34c and cold beers in the fridge

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
cams
« Reply #14 on: June 02, 2006, 04:41:52 PM »
I'll get them this weekend and pop em in the post. PM me your address.