Author Topic: Me again.......  (Read 9377 times)

0 Members and 1 Guest are viewing this topic.

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Me again.......
« on: October 30, 2014, 09:24:35 PM »
Somebody has told me some Honda Civic engines will go in a fiat 126, are they right or have I been told a bit of rubbish there?


Sent from my iPhone using Tapatalk

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Me again.......
« Reply #1 on: October 30, 2014, 10:00:13 PM »
Your gonna struggle to get any engine bigger than a shoebox in the back of a BIS
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

Scarlettkitten

  • Super Member
  • ***
  • Posts: 105
  • Karma: 0
  • Location: Midlands, UK
Re: Me again.......
« Reply #2 on: October 30, 2014, 11:14:25 PM »
I was looking at engine swaps and you can fit most usual options in like fiat cinq engine or even VW, but you'd need to cut a bit or the rear away and make your own (taller) engine lid. I may venture into this next year, maybe cinq sporting engine .
1990 126 BIS

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Re: Me again.......
« Reply #3 on: October 30, 2014, 11:19:25 PM »
Hmm yeah was wanting to attempt it but what other engines run anticlockwise?


Sent from my iPhone using Tapatalk

poxxxy

  • Super Member
  • ***
  • Posts: 527
  • Karma: 0
Re: Me again.......
« Reply #4 on: October 31, 2014, 08:34:12 AM »
Dom... I have to say this... stop spamming the forum with your crazy thoughts... you're 15, can't drive and want to put every engine under the sun in the 126 yet haven't even given the original car a drive to have a feel for it. This is not the way to learn!
My 1991/2 Fiat 126 BIS Restoration: http://club126uk.co.uk/forum/index.php?topic=8559.90

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Me again.......
« Reply #5 on: October 31, 2014, 09:19:30 AM »
I agree. I'm all for engine conversions - in fact I'ld love to do run an air cooled with a 1000cc FIRE engine as I've seen this and it looks a tidy and tasteful conversion. I wouldn't even attempt one in a BIS as the room inside the engine compartment is tiny and is only big enough for ....... Well, a flat twin so any engine that stands upright (such as a lot of bike engines) just won't fit unless you chop the rear bulkhead and rear panel which would not only compromise the ridigty of the chassis but is also dangerous as you'll have the top of the engine in the car with you and will choke you out with the fumes - this could be cured by an allaborate engine cover of course which is also more work.

Then there's the good old scooby engine. Flat it may be but I fear not flat enough due to the complex fuel injection and intake/inter cooler set up then there's the issue of cooling as the scooby engine is probably too wide anyway so the radiator will have to be moved...... Probably to the front (more work).

I admire your enthusiasm I myself had wild ideas when I was your age too but you need to be realistic. ebay is littered with half baked 126 projects that people have bought in the hope of achieving that ultimate goal of fitting a powerful engine but have had to abandon as the work involed isn't as straight forward as they first envisaged. These car are great fun to drive even with the standard engine in - there not as slow as you think and there are some improvements you can make to them to make them an even more enjoyable experience :)
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Re: Me again.......
« Reply #6 on: October 31, 2014, 10:36:10 AM »
I am 16 yes, I can drive as near to me there is an under 17 driving area.... I have driven my 126 and also another, it's not I do not like the fiat with its original engine but from what ever body has said the original engine is not reliable in the slightest. If I am wanting to spend as much money on this car as I am I do not want to have an unreliable engine,
Also I have already saved and bagged myself a reliable daily driver for whilst this process of an engine conversion to take place and all the rest of the conversion in my fiat,
So thanks for stating my age and trying to humiliate me mate, I'm only asking for advice and to what people think of what I shall be attempting.


Sent from my iPhone using Tapatalk

drcdb15

  • Super Member
  • ***
  • Posts: 511
  • Karma: 6
  • Location: East Grinstead, West Sussex
Re: Me again.......
« Reply #7 on: October 31, 2014, 12:41:53 PM »
Don't listen to them, Dom, you go on and dream your crazy dreams. If no one ever tried crazy things we'd all still be paddling along in Fred Flintstone tree trunk cars rolling on logs. Who made the V8 126s we see at Santa Pod, who put twin triumph engines into drag racing bikes in the 60s, who built the original Munsters Hearse-mobile and was King of the wild wacky world of the custom Hot Rod in the 60s (look up Ed Roth on Wikipedia)? How downright boring would motoring be today without these crazy guys who dreamed crazy dreams ?

So you're only 16, so what? I'm 62 and still doing crazy things that drive my wife and daughter nuts. (Fortunately my son is on my side  ;D) My very first car was a Fiat 500 Giardiniera, and we loved that car - but it was a total rust bucket. Now most people would have just binned it and bought a different one. But not me. I wanted to keep the car but solve the rust problem. Answer? Make a complete duplicate in fibreglass. Crazy dream? I should say so, but I went as far as discussions with Geoff Jago of the famous Jago Jeep (still in business, see here: http://www.jagodevelopments.com/Services.aspx?id=7). That was followed by more than a few other unfinished dreams - an Ariel Arrow 250cc engine into an early BSA Bantam D3 frame, a Fiat 850 engine into a 500 saloon, a 750cc Triton.

Most recently I tried restoration of a Scimitar GTE with a Rover 3.5V8 engine. Another crazy dream, and my most expensive to date - 7 grand, ouch! Yes, you spend a lot of money along the way, and yes there are lots of unfinished projects (a good few of them mine!!) and yes, it may not be the best way to learn. But I can tell you, after over 40 years of doing it, it's not a BAD way to learn. My son often says to me "how did you know that?" or "where did you learn how to do that?" - and the answer is, by messing about with cars and crazy dreams for over 40 years.

A year or so back I bought a CC Zero from Ladislav. I'm 62. It takes me 10 minutes just to get into the darned thing! Crazy? You bet !!

Go for it, Dom  :yahoo:

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Re: Me again.......
« Reply #8 on: October 31, 2014, 12:59:58 PM »
Thankyou!! That's exactly what I'm going for, if I don't attempt or try or even ask questions how am I supposed to know what I can or can't do or would enjoy doing?
Your sound like my kind of mate ;) all of my mates from 16 (me) then a jump to 21 years of age and then through out until 30, all of us have different price ranges, different loves, different skills and qualities but we all enjoy the same thing.... Fiddling about with random and wakey dreams of what we can make.
Hope you carry on with all your crazy contraptions for many many years such as my grandad did, he started at 12 messing with welding bike to bike (yes weird but always unique) and right up to now at the ripe old age of 81 with mobility scooters with quad engines and lawnmowers modified to high hell!
Anyway, I'll keep my thread of my restorations (even with haters) and show everyone how it works and how to follow what they want to do and follow! Thanks again for your support :)


Sent from my iPhone using Tapatalk

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Me again.......
« Reply #9 on: October 31, 2014, 10:24:30 PM »
Sorry bud didn't mean to p##s on your chips it's just you asked for advice and that was my two cents. You can't expect everyone to see it your way. I've been fiddling with 126's before you were born . There reliable so long as you look after them. The engines are so simple there a joy to work on and are great for someone like yourself to cut there teeth on in the world of engineering. But of course It's your money and time....... What do I care? Keep the thread going though - this is a public forum after all and although I'm not a supporter of your idea I'm sure others would love to know if an engine that's taller than 55cms and wider than 70cms + all the ancillaries will fit or how you will sort the handling with all that extra weight when you do fit it ........ But I'm sure your find the answer.  ;D

FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

DeVilleChris

  • Subscribers
  • Super Member
  • ****
  • Posts: 1217
  • Karma: 7
    • Club 126 UK
Re: Me again.......
« Reply #10 on: October 31, 2014, 10:29:33 PM »
Hi Dom. Firstly, I dont think Poxxxy meant anything sinister by his post, nor do I think that it was meant to humiliate you; as it has been stated there are lots of failed engine conversions all over eBay, bikes mainly. The idea of an engine conversion has been passed around this forum as long as I have been here (around 18months) and there is only 1 I have read about that has succeeded, and it took mountains of work....

http://club126uk.co.uk/smf/index.php?topic=7448.0

Have a look at this topic, that is an aygo engine into a 126, look at the amount of work needed for even a small engine transplant, looking at this shows 2 things, yes its possible to make a conversion; and that it takes a lot of work, so you may need to think very carefully if you are wanting to make one that you can actually drive on the roads.

Secondly, The 126 engine is not exactly "unreliable", I have driven mine as a daily driver for 2 years, and I have only ever not been able to drive it once.. And that was me being silly and pushing it too hard, the head gasket went. Its had its little misshaps but its always got me home, and ive driven some fairly long distances in it, 160mile trips to shows etc. If you look after it, then you will be fine with the standard engine.

Thirdly, the insurance costs for you will go sky high if you put in a bigger engine, especially at a young age, I'm talking from experience here as my insurance was serious money, 4 Figures.. putting wheels on mine that aren't standard is bumping it up by a couple of hundred next year; so that is something to think about.

If you do you go ahead here then there will be as much help as possible here, but most likely will only go to a certain extent, as you can imagine, we don't know what engines will go until its been fitted so its a trial and error sort of system. I wouldn't call people "haters" its just that people do have their own opinions and its hard to understand how someone is trying to say something when its typed rather than in person.

At the end of the day it is your car, and you do with it whatever you see fit :)
Good Luck  :) ;) ;D

Chris
1979 Fiat 126 DeVille
1979 Fiat 900T Amigo

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Re: Me again.......
« Reply #11 on: October 31, 2014, 11:29:14 PM »
Ahh right thankyou guys for seeing it from my point of view :) I'll keep my thread going and keep everybody informed whilst in the process of this. In addition do you think with the fiat 126 bid engine with all top end internals may still take a bit of hammering and still be running after a year or two?


Sent from my iPhone using Tapatalk

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: Me again.......
« Reply #12 on: November 01, 2014, 07:42:42 AM »
Yes I do. ive found them to be quite hardy. You kind of have to thrash them to get them to move so you do end up make full use of the Rev range. It's the cooling system that lets it down. If this is neglected then the head will blow but it's easy enough to maintain you just need to make sure the thermostat works perfectly and give the cooling system a flush out every two years. Modifications can be done such as fitting a fan switch in the car or even removing the thermostat completely. There's no worries about Pistons flying through the block  :D
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

dom.kellett

  • Super Member
  • ***
  • Posts: 177
  • Karma: 0
Re: Me again.......
« Reply #13 on: November 01, 2014, 08:33:13 AM »
Ahh right thankyou I may just stick with the original engine(still upgrade the internals) then wait until I can afford to run a Subaru and do it then :)


Sent from my iPhone using Tapatalk

DeVilleChris

  • Subscribers
  • Super Member
  • ****
  • Posts: 1217
  • Karma: 7
    • Club 126 UK
Re: Me again.......
« Reply #14 on: November 01, 2014, 12:07:54 PM »
Makes much more sense :)
1979 Fiat 126 DeVille
1979 Fiat 900T Amigo