Hi Mile
I don't know why you would want to block this pipe, If the tick-over is set to 850 RPM this solenoid is there to stop the engine from stalling on tick-over when the fan kicks in,
When the thermo switch in the radiator switches the fan on, the solenoid is energized and opens the vacuum from the manifold which pulls the diaphragm up on the carb, and in turn increases the throttle to compensate for the extra power needed to drive the fan. There is an adjustment screw on the top of the diaphragm housing, when the fan cuts in this should be adjusted so the engine RPM stays the same whether the fan is on or off.
It does not make any difference to the performance of the engine.