the bis can be lowered quite easily- by buying a complete lowering kit with rear springs shocks and a reverese eye front spring-
these guys are prob-LEE running a more modified set up to get them this low.
When I lowered mine I had to put a reverese eyed front spring (1 leaf removed) in with air cooled rear shocks on the front (they are shorter than standard and stiffer) then had to do a camber mod to get the tyres under the arches. I also rolled the front arches in and had to "modify" the insides of the wheel wells slightly with a hammer where it rubbed. I plan to lower it more my cutting down the alloy isolater blocks above the leaf spring by about 10mm.
at the back I run cut down bis springs measuring about 15cm tall uncompressed with a set of spax adjustable again with rolled arches for clearance.
I have a set of cut down polybush bumpstops front and back.
I have 13" x 5.5 wide wheels running 175/60/13 tyres and Im pretty sure you cant get much wider under a standard bis arch when this low-

so in short yes you can lower a bis- how easy it it depends on how low you want to go but I'm pretty happy with this.
its worth remebering that 13" fiat/lanci and alfa wheels with a 4x98 stud pattern shoud fit.