All wheels stay on the ground. A upright part of the towing device butts up to the front of the wishbone either side of the car & then a chain attached to that bar goes around the wishbone & back to the ratchet strap which pulls it tight not allowing any movement. After this put your key in the ignition so that the steering lock isn't on & attach the a-frame to the towing vehicle. When you turn a corner the wheels of the car your towing will follow you & straighten up when you do. Kind of like pulling a shopping trolley from the front,the wheels will turn in the direction it's being pulled.
My problem with the 126 is there is a leaf spring & a clearance issue with the height of the car being towed by a transit van.
That's why i was asking has anyone used this device on a 126. I know it works on my 127 & 130tc but unsure of a 126.