Author Topic: 795 ccs Cylinder Head  (Read 3018 times)

0 Members and 1 Guest are viewing this topic.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
795 ccs Cylinder Head
« on: May 30, 2011, 07:27:16 PM »
After waiting for months I finaly got the cylinder head back from the specialist today. It is a reworked 126 head that was described as a "Stage 1" head back in the 80's. The engine work was done by Italtune (went onto be Lanciana) in London as part of a 795 ccs conversion using Alquati parts & possibly VW pistons & barrels (yet to identify as just described as a Big Bore Kit) . The head has now undergone a full inspection with additional improvement work on the inlet and outlet ports, mods to the valve seats & valves plus I gave the guy the original Alquati inlet manifold that he has polished out and matched to the head as I thought that area could be improved. The manifold takes the rare Weber twin choke 30 DIC carb which did not come with the engine but I found one in a box of old carbs at Retro Rides which I got for a song then sourced another one from a guy in New Zealand so things are shaping up and moving on  ;D

smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: 795 ccs Cylinder Head
« Reply #1 on: May 30, 2011, 09:47:28 PM »


Rusty,

Like the head work, the big question is when's it going to be running? and in the back off that 500
air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

Allan

  • Super Member
  • ***
  • Posts: 226
  • Karma: 1
Re: 795 ccs Cylinder Head
« Reply #2 on: June 26, 2011, 10:09:33 AM »
Which vehicle was the 30DIC OE on?

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: 795 ccs Cylinder Head
« Reply #3 on: June 26, 2011, 11:41:57 AM »
Very nice  :D :D :D :D :D
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: 795 ccs Cylinder Head
« Reply #4 on: June 26, 2011, 11:44:41 AM »
The Weber 30DIC , as far as I know , was only ever fitted to the 850 Sport Coupe as standard which is why they are a bit rare. I have two carbs , Weber and an Italian made Holley Europa which are identical apart from one has brass butterfly sipndles , the other has steel. They were a popular tuning mod for some engines hence the Alquati manifold from the early 80's. When I got the 795ccs engine the seller told me that he preferred the Dellorto FZD 32 28 which I have also. He never went into details about why but as he used to race some pretty heavy duty cars and bikes on the European circuits I guess that the Dellorto gave him that little bit more. I want to try out the Weber at some stage on a 652ccs engine to see how user friendly it is. Nice to have a bit of performance but I also want to pop to the supermarket  ;D

Allan

  • Super Member
  • ***
  • Posts: 226
  • Karma: 1
Re: 795 ccs Cylinder Head
« Reply #5 on: June 27, 2011, 01:28:49 AM »
Thanks uncle R. There must be 850 coupes lying around all over NZ.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: 795 ccs Cylinder Head
« Reply #6 on: June 27, 2011, 05:39:41 AM »
Well I found 2 cars in Horopito. One was pretty much complete. The other one I could not get round to the back to see in the engine compartment.