i will join your discusion
how to drop it on the ground
leafspring front few types of mods. zou have to go with it to a smith to get it flat for the height You want, original is 24 cm from ground in the middle that is highest point, mine is flatened to 15 cm and it drives ok, turnes ok, rubs a little bit the inside of the wheelarch while maximum turning thats good for lowering for racing some say zou have to giveone laef more while flatenig to give it more stiffness but it has to be lower to let drop more because it will be stiffer. with mine setting i can get to 2,5 degrees negative position of wheels for better grip while cornering. of course all depends on your smith and the leaf your working on, use only new originals or origilnas, zou will propobly try more than once till zour be happy, i tried twice and now third setting hopfullz will be the last one, about shocks like u said rear to front, and change oil in the rear shocks for rear, or buy an avaible bilstain shocks kit for 126p, but for the city use just cut the spring and flat the leafspring dont need to change shocks
rear springs
it is commonto cut it by one turn of the spring, nothing happends with the wheel no rubing or hiting, but u have to remember that if you cut a spring it becomes softer so i used rubber spring spacers to make it stiffer and now i will mount modified shocks for rear and rear to front