Author Topic: Cylinder Head Upgrade  (Read 6159 times)

0 Members and 1 Guest are viewing this topic.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Cylinder Head Upgrade
« on: April 09, 2010, 07:44:13 PM »
As a tentative venture into tuning a standard 499ccs head I decided to have a spare head fitted with the Panda 30 valves I had . I found a guy on the net who specialises in motor bike cylinder head work and actually races a classic BSA Gold Star himself . After some e-mail chat I paid him a visit today.
All I can say is that it was a real education , The guy had never seen a 500 head before but he spent about 30 minutes examining the head and explaining in great detail how it could be dramatically improved in terms of gas flow . Some of the stuff he was saying was quite mind boggling  :oops:
So he is going to improve the standard Panda 30 valves , fit a larger seat for the 34mms inlet valve ( already had an unleaded seat fitted on exhaust) Improve the profile on the valve seats. Open up the inlet from 26 to 30mms in line with the 126 (so I can fit the 126 carb) , do all the porting & polishing & improve the combustion chamber characteristics . Reckon it should be iteresting. Will keep you guys informed  [-/

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Cylinder Head Upgrade
« Reply #1 on: April 09, 2010, 07:47:33 PM »
Sounds like a good discovery!
Is he local to you?
Rust does not discriminate

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Cylinder Head Upgrade
« Reply #2 on: April 09, 2010, 09:13:09 PM »
I might have found this link on this forum.... but i'm not sure. Interesting stuff in this as well...

http://www.pumaracing.co.uk/index.htm

Good luck with your tuning  [-/
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #3 on: April 10, 2010, 08:21:47 AM »
It is about a 3 hour round trip to get to the guy & back. It was some of the stuff on valve sizes from the Puma racing site that helped my thinking on this  [-/

Amateb8

  • Subscribers
  • Super Member
  • ****
  • Posts: 2148
  • Karma: 8
  • Location: London
Re: Cylinder Head Upgrade
« Reply #4 on: April 11, 2010, 06:59:13 AM »
I had this done to my VW Beetle together with other modifications many many moons ago  The car's performance improved significantly. I look forward to your updates with great interest. I wonder whether anyone has done something similar to a 126 Bis.

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: Cylinder Head Upgrade
« Reply #5 on: April 12, 2010, 10:38:25 AM »
Hey Rusty,

Couple of things to keep in mind when you see this bloke again.

Take your inlet and outlet manifolds with you and get them port matched to the head.

Being air cooled, water passageways arent a problem, so you can pretty much go wild with port volume cc's

Also enquire about a '3 angle' valve job and get them swirl polished if possible.

All little things that often get overlooked but offer huge performance gains.

Cheers
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #6 on: April 12, 2010, 02:55:15 PM »
 [-/ Hi Dan , the guy went over all those options for the valves and the seats plus some other ideas. Once he got his hands on the hardware and after some examination he literally talked me through a "gas flow" journey in relation to the porting & valves pointing out the aspects of the head casting ports & combustion chambers that could be improved. This is a bit like Act 1 , Scene 1 in a classic production "Journey to the End of the Exhaust Pipe"  ;D

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: Cylinder Head Upgrade
« Reply #7 on: April 14, 2010, 01:37:00 AM »
Gotta love the classic productions. My journey began at 230hp and ended at 400.
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Cylinder Head Upgrade
« Reply #8 on: April 14, 2010, 09:35:41 AM »
He can do a head for me next  :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #9 on: April 29, 2010, 01:11:54 PM »
No news on my head yet but I am not going to rush the guy , going to let him work his magic in his own time. However spent the morning looking over another 795ccs Alquati engine that is owned by a local guy. He bought it with a label attached that says 800ccs , lightened flywheel, Weber twin choke carb, sports exhaust, Alquati barrels & pistons. Cylinder head is a bit of a mystery as it has numbers where you would expect to see 650 on the casting but it does say that has been ported & Panda 30 valves fitted. All very interesting but not for sale I am afraid . I wanted to check the mounting for the carb as I will have to have parts made. He has had the engine running out of a car & is now going to try it out in one of his 500s.  ::)

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #10 on: May 12, 2010, 05:43:22 PM »
Got an e-mail today to say that the head has moved into the workshop and the work has begun  :D Even been sent pictures.
Due to my ignorance in such matters I never thought to take up exhaust & inlet parts (like gsxr126 Dan suggested) so we are now in conversation about this side of it . I will keep you guys posted  [-/

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: Cylinder Head Upgrade
« Reply #11 on: May 12, 2010, 06:12:57 PM »
wheres the pictureeeeeeeeeeeeeeeeeesssssssssssssssss????  :-
Neil gargaro

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #12 on: May 13, 2010, 12:41:37 PM »
 ;D I reckon that some of you guys just read comics as you always want pictures  ::)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Cylinder Head Upgrade
« Reply #13 on: May 13, 2010, 04:59:11 PM »
Them's proper seats! [-/
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Cylinder Head Upgrade
« Reply #14 on: May 13, 2010, 05:46:13 PM »
Looking better now though  [-/