Author Topic: Reverse gear gone!  (Read 4796 times)

0 Members and 1 Guest are viewing this topic.

richk

  • Member
  • *
  • Posts: 72
  • Karma: 0
Reverse gear gone!
« on: February 11, 2010, 04:41:39 PM »
Hi guys.
My reverse gear has been getting harder and harder to select lately. Now it's almost impossible. It feels like its gone in but it's in 4th. It will go in but it takes about ten attempts.
When I'm driving in top the gearlever's all over the place, so I'm hoping it's a worn linkage somewhere, although the forward gears selects are great.
Any pointers before I go and freeze my bits off in the cold? :cry:

Dan_535

  • Member
  • *
  • Posts: 56
  • Karma: 0
Re: Reverse gear gone!
« Reply #1 on: February 11, 2010, 05:39:06 PM »
try changing the gearbox oil, i changed mine pretty soon after acquiring the car as had similar issues (not particularly suprising as was laid up in a shed from 1979 - 2009!). i find the linkage / gear selection is pretty slack anyways, certainly compared to a lot of other older cars.

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Reverse gear gone!
« Reply #2 on: February 11, 2010, 06:09:08 PM »
 I had the similar problem with our 73. It wasn`t selecting gears at all when we bought it. There are two gear linkage bushes inside the tunnel. One right at the back and one in the front. My were non existing, I guess due to the age of the car they just fell to bits. Try to have a look if you got them in place and do some adjustment on the gear linkage rod.
 After I did this my gear change is perfect.
1972 Fiat 500
1980 Fiat 126

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Reverse gear gone!
« Reply #3 on: February 11, 2010, 06:22:08 PM »
 >:(  I just spent 30 mins typing an in depth reply on this & it disapeared into the ether when I pressed post so b*****ks. but it will be those bushes. I have some bits here if you need them quick as I was just about to overhaul a spare gear lever assembly  [-/

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Reverse gear gone!
« Reply #4 on: February 11, 2010, 06:31:58 PM »
 Here is a pic. Ricambio do them for £7.50, or take Rusty`s offer.
1972 Fiat 500
1980 Fiat 126

richk

  • Member
  • *
  • Posts: 72
  • Karma: 0
Re: Reverse gear gone!
« Reply #5 on: February 12, 2010, 09:03:01 AM »
Cheers guys, will get on to it.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Reverse gear gone!
« Reply #6 on: February 12, 2010, 12:24:20 PM »
 ??? I have seen those items in the Ricambio eBay shop and they confuse meas I do not recognise them or how they mount in the housing.
Just taken more pics , one of a gear lever / linkage that needs repairing. You can see the press in bush has broken and fallen out of the back of the housing also the anti-vibration spring has fallen off. The second pic shows all the parts you might need for a complete overhaul  [-/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Reverse gear gone!
« Reply #7 on: February 12, 2010, 01:22:58 PM »
Have a look at the linkage on the end of the gearbox first. There is a rubber goodie inbetween the box and the shaft that goes to the stick, it could be knackered or simply loose.
Somehow I doubt those bushes would make it that bad.

I found my gearbox mountings had moved which caused the whole engine/gearbox to rock over one way. This made 3rd a nightmare to find. It's better now but when I can be assured I wont get frostbite when I step outside I'll have another look.

From my experience the bushes make the stick rattle when they are worn, but a pig of a job as the while tunnel has to come out.
Maybe I think it's a pig because I'm too big for working inside the car  :P
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Reverse gear gone!
« Reply #8 on: February 12, 2010, 01:53:19 PM »
You 126 guys have got it easy as you can remove the carpet section over the tunnel to do the work. On a 500 you have to remove the seats so you can remove the one piece carpet before you can tackle the job. The rubber goodie you mention is the bit shown at the top of the picture. Although I have seen a couple where oil has started to attack the rubber I have never known one to fail completely. Plus I have never had to replace the bush at the rear end of the link rod as if the gearbox is mounted correctly then I think it takes far less stress.  [-/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Reverse gear gone!
« Reply #9 on: February 12, 2010, 01:57:09 PM »
The one at the back of the tunnel is in never land, never seen it never want to  :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

richk

  • Member
  • *
  • Posts: 72
  • Karma: 0
Re: Reverse gear gone!
« Reply #10 on: February 12, 2010, 03:02:45 PM »
Thanks for your help guys. Decided to bite the bullet and have a go, that's the beauty of self employment!
Right, how hard can it be- a couple of bushes?
No access under the car so, 3 seats out, centre console out, seat belts out, carpet out, rear tunnel cover out, front tunnel cover out.
Jack car up, undo rear rod/flexi union bolt (10mm where you can see it, 13mm where you can't- live & learn!)
Undo gear stick bolts on the tunnel, withdraw gear rod. Job done! No bushes to be found where they should be, they're all broken up!
New bushes for me then! Could someone tell me where the springs go that come with the repair kit?
I didn't find any! Do you have some spare bushes Dave! Otherwise it's Ricambio, expensive I know but local to me.
R.
« Last Edit: February 12, 2010, 03:04:38 PM by richk »

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Reverse gear gone!
« Reply #11 on: February 12, 2010, 03:45:06 PM »
I think I remember the one with the hooked-ends holds the stick against the stop to stop you putting it in reverse by mistake and the other holds the stick up so one has to push down to get reverse.
Ricambio should have bushes, and they are rubber with a brass insert, they fit around the shaft into the hole.

hope that helps  :oops: not the best at explaining stuff  :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

richk

  • Member
  • *
  • Posts: 72
  • Karma: 0
Re: Reverse gear gone!
« Reply #12 on: February 12, 2010, 04:15:33 PM »
Thanks Dar, I think I get the drift. I see the big one that you push down against, but there's no small one. I would assume it fits sideways somehow and keeps the stick to the left when in neutral.
Ricamb do the bushes but I hate being tucked up! £15 for two :o
126fan: £3 ish for two. No contest- I'll pay the postage and wait!
« Last Edit: February 12, 2010, 04:17:44 PM by richk »

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Reverse gear gone!
« Reply #13 on: February 12, 2010, 04:22:05 PM »
Yeah the little one is tricky, it goes into little holes from the right side of the mechanism to the stick part of the mechanism.

I guess £15 is alot but then I guess if you needed it urgently they'd be there to supply it.

9/10 times with me i need it quickly as I made the foolish decision to sell all other vehicles and the 126 is my only wheels, much to my wife and family's disgust :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Reverse gear gone!
« Reply #14 on: February 12, 2010, 04:43:58 PM »
 Rusty those early 126`s have got a one piece carpet so the same stuff as the 500.
 Those bushes are a right ..... of a job. I think you`ll have to take the front bit to bits too(the selector rod), as you can`t put the bush in there otherwise.
 The ones from Ricambio are expensive, but I guess they would last longer and would make the rod easier to slide as they got those copper inserts.
 Good luck.
 The car looks good too. It`s nice to pull the carpet out sometimes :oops:
1972 Fiat 500
1980 Fiat 126