Author Topic: sagging roof  (Read 4893 times)

0 Members and 1 Guest are viewing this topic.

ianfromcumbria

  • Member
  • *
  • Posts: 15
  • Karma: 0
sagging roof
« on: June 05, 2009, 07:30:33 PM »
I've read on the forum that a 126 cab is fine for anyone up to about 6'2" in height. I'm a tad over 6 foot and not only is the headlining sagging, but the roof itself is and it is brushing my head. I have to crouch to drive. I can push the roof up but it pops back once I let go. How can I rectify this?

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: sagging roof
« Reply #1 on: June 05, 2009, 08:12:41 PM »
Simply rip the headlinig out! ive done so and now have more headroom than in my fathers golf  [-/
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: sagging roof
« Reply #2 on: June 05, 2009, 08:56:59 PM »
First rule of 126 driving "do not look back"  ;D
Second rule " if the lining sags then it is shagged"  :oops:
Just rip it out & get on with it  **-

Normansinjunstevas

  • Super Member
  • ***
  • Posts: 187
  • Karma: 2
Re: sagging roof
« Reply #3 on: June 05, 2009, 11:35:33 PM »
Third Rule : You do not talk about 126 Club

Forth rule : You Do NOT talk about 126 Club

Norman

Andi

  • Super Member
  • ***
  • Posts: 148
  • Karma: 3
Re: sagging roof
« Reply #4 on: June 06, 2009, 05:15:07 AM »
Seems to be time for an Abarth Double Bubble solution on your 126  ;D

ianfromcumbria

  • Member
  • *
  • Posts: 15
  • Karma: 0
Re: sagging roof
« Reply #5 on: June 07, 2009, 03:49:35 PM »
Having read the replies to my post, I've checked the rules for 126 Club membership and nowhere does it state "must be a complete and utter .......

I would suggest that if your not happy with the answers or banter that forum members have written. That you find your own solution or post elsewhere.  Pete126.
« Last Edit: June 07, 2009, 05:10:56 PM by Pete126 »

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: sagging roof
« Reply #6 on: June 07, 2009, 04:55:04 PM »
Thats the way to get help. :-

Take it out, throw it away, most of us don't have the bit of hardboard it sags rattles and is a waste of time. If you need one it hardly takes a brain surgeon to remove a bit of card and replace. Yours got damp at some point.


Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: sagging roof
« Reply #7 on: June 07, 2009, 05:21:37 PM »
 ;) Hi Ian , I know that you guys in the deapths of Cumbria can be a tad reserved but do not worry you can use the word "CLOT" here without offending anybody, my Dad calls me that all the time but I let it go as he is past 90 years old now.
"Great" Rusty's Uncle does not post on this site but like many people who do he knows plenty about cars & I think you will find that there are no barriers , social , age , gender , nationality , world location or whatever between the folks that are united by a passion for the baby Fiats.
Having a sense of humour seems to be part of the package but if you can hang with it the advice you will get will be top drawer & based on experience so sometimes the answers are not what you want to hear but that is the way it is.

Quote from your earlier post .......... "I have the mechanical aptitude of a dead heron"

We are not too Heronistic here but I hope that things improve for your car, your aptitude, your local heron and your funny bone   ;D ;D ;D

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: sagging roof
« Reply #8 on: June 07, 2009, 09:03:04 PM »
may i please state if you can save your headlining then do so!!! or be the victim of condensation and more noise in the car. "get some no more nails sort of gunk" and bosh that in to stick the thing back up use some lengths of wood 4 by 2 (and thats not meaning get a yiddo to sit in your car all night rusty) to hold it until its stuck.
 

phelps8031

  • Member
  • *
  • Posts: 20
  • Karma: 0
Re: sagging roof
« Reply #9 on: June 09, 2009, 04:04:28 PM »
Hadn't really noticed that my headlining was sagging until I read this and checked it. If i pop it back up i got plenty of head room, I'm 6'3" so any extra headroom is nice to have. So today I attacked it with a full tube of sikaflex, well stuck now.  :fing02:

fightingtorque

  • Super Member
  • ***
  • Posts: 120
  • Karma: 0
Re: sagging roof
« Reply #10 on: July 03, 2009, 10:28:19 PM »
I also have a headlining issue that I was meaning to ask about.

The cardboard bit is fine, but the cloth covering is loose.

1.  How likely is it that I can remove it, turn it other way up, remove cloth bit, spray with contact adhesive, stick it back on, get the cardboard bit back in position and be pleased with a good job rather than bugger the cardboard getting it out and in.

2.  If I am going to take it out in one piece, presumably it should be out through the rear hatch?  (I have a Bis).

3.  Is there a cunning way of doing it in situ instead?


I can fix easy things like engines and stuff but when it comes to trim I have been known to lose patience trying to get things apart that were only ever designed to be clicked together and not the reverse.


Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: sagging roof
« Reply #11 on: July 03, 2009, 10:48:14 PM »
basically all you have to do is unscrew the few plastic bolts in the back that hold the rooflining in place, then pull it out of the tailgate gently. this is only theory cos usually thing go wrong when they can and your best bet is to rip it out, get a new cardborad and start from scratch... if you do manage to take it out post a few pics, i forgot what mine looked like, and might consider making a new one myself  [-/
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: sagging roof
« Reply #12 on: July 03, 2009, 10:53:04 PM »
I am with you on being a hazard with interior stuff.

And reading the thread I have realised now why I can heardly hear myself think in the car :oops:

I am thinking re-glue-ing would be hazardous as I tried a bit with mine..it ended-up with creases.

So I ripped it out.

Now I am thinking along the lines of a piece of carpet, cut to size, overlocked aroung the edges. The contact adhesived-up. Any thoughts?
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: sagging roof
« Reply #13 on: July 03, 2009, 10:59:00 PM »
just get some thin mdf as was in as original and glue some thin foam onto the roof first then cover the thin mdf and glue into place if you have the original use it as a pattern dont forget these headlinings have fell down after around twenty years or over!!! and its very noisy without one!!

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: sagging roof
« Reply #14 on: July 03, 2009, 11:05:14 PM »
 :oops: I go shopping for thin mdf this weekend if rockers behave [-/
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)