Agree with Mick [-/ can't agree with Pete

Yes they are the standard steel 12" wheels , you seem to have lost your hubcaps by the way.
Puck , in your reading of the tyre size those smaller numbers at the end are nothing to do with the size. Standard tyres would normaly be marked 135 12 or 135 R 12.
That means 135mms tyre width with a 12 inch diameter rim. If you have an R there that means Radial Tyre but the fact that the tyre width is given in mms also tells you it is a radial tyre.
Interesting that tyre sizes the world over are given in metric for width and imperial for rim diameter . That is a bit of a throwback to when we had one of the best motor industries in the world & called the shots. Prior to radial tyres we had cross ply tyres which were in imperial so a 5.20 x 14 tyre would be a cross ply 5.2 inches wide for a 14" rim.
Most modern car tyres now have a profile rating which is the height of the tyre section expressed as a percentage of the width. So a 135 80 12 tyre would have a section height 80% of 135mms and would in effect be a low profile tyre with a smaller overall diameter so this is where I disagree with Pete about the correct size for the 126 rims. If you did get that size tyre then you would gear your car down , lower the top speed,
improve acceleration & your speedo would over read.

There are other letters & numbers especialy on some of the more hybred tyres but I have probably confused you enough already so I had better shut up now
