Author Topic: Guido the Fiat  (Read 87752 times)

0 Members and 2 Guests are viewing this topic.

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #135 on: December 17, 2008, 07:22:04 PM »
yes a ratchet, love it..  :oops: :D

we call it a "gedora"  but i have a feeling its a german word...
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Guido the Fiat
« Reply #136 on: December 17, 2008, 08:35:58 PM »
"OMG" I think I would struggle with those two gearboxes Gordon, Hope you remember where everything goes ;D


 
Pete.      il cavallo piccolo

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #137 on: December 17, 2008, 08:48:47 PM »
o i know where it all is going, its going to the bin, thats where its going  :D :P ;D
i took off all the things that ill need in case i buy a aircooled box, this is all a pile of junk.

p.s. ive noticed that im missing several teeth on my differential, what could have caused this??
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: Guido the Fiat
« Reply #138 on: December 17, 2008, 09:32:29 PM »
Yes it looks like you've got a little bit of blow back past the piston rings thats pressurizing the sump, you could make your own oil catch container just cut two holes into a plastic jar one for the breather pipe and the other as a breather, if you put something like cotton wool into the bottom this will absorb the oil, you should be able to mount it somewhere on the back panel then you won't get into trouble for leaking oil on the drive ;D ;D don't forget to empty it tho.


these catch tanks are cheap enougth and they look the part aswell


http://cgi.ebay.co.uk/NEW-JDM-Style-OIL-CATCH-TANK-Special-Price_W0QQitemZ300281385815QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item300281385815&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318
Neil gargaro

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Guido the Fiat
« Reply #139 on: December 18, 2008, 08:49:24 AM »
if you,ve lost teeth in your diff it might suggest that it has been taken apart and rebuilt but has had not had the backlash adjusted and thus has weakened the teeth then they smash/fall off , when the car is put into a lower gear at speed . or loike us they lose teeth with age !!!!! lol

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #140 on: December 18, 2008, 11:23:31 AM »
all that was done to the box is that the bell housing and the diffs were swapped from my bis box. and the diff was perfect when i put it in. the old diff also had a few lost teeth? could anything in the process have caused this, and what can i do to stop it from happening again?

Thanx for your reply.  ;)
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Guido the Fiat
« Reply #141 on: December 18, 2008, 06:36:36 PM »
I reckon its all those burnouts and the race starts that you have been doing xmas2 xmas2 xmas2 Sorry thats not much help ;D

But seriously Have you check if there is any play in the output roller bearings that supports the differential in the casing.
Pete.      il cavallo piccolo

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #142 on: December 19, 2008, 05:07:31 AM »
yeah, no 402 m runs for me...  :P i think that the roller bearings are/were tight enough, if im not mistaken it says in the manual that it should be set up by feeling, and i dont have any special equipment, i dont even have a torque wrench  :oops: :oops: so i just tightened it till it was tight enough, but not too tight...  :D :D
thing is that in my orig box, the diif was perfect, and then i put it into a box which messed up one diff, and it messed up the second aswell.  ???
hope ill have more luck third time round  :D
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Guido the Fiat
« Reply #143 on: December 19, 2008, 09:38:49 AM »
I'd hang on to those bits of gearboxes because 126's can break any bit in a gearbox without warning. ;)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #144 on: December 19, 2008, 02:01:45 PM »
Yeah good tip, the original box looks almost perfect on the inside, all the parts are like new, but for some reason the car shakes in first and then pops out... still a great mistery  :P
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Guido the Fiat
« Reply #145 on: December 19, 2008, 02:30:00 PM »
If you change a diff, then you have to use the same crown wheel and pinion, that is they are 'machined' together if you like, i.e. you can't just use a crown wheel from one 'box in another one, the partner pinion has to be changed as well. Goes for buying new diffs: they come together, and are marked together as well. One reason why it may be 'popping' out of first, is that there are little ball bearing like parts (don't kow the name of them) that a spring keeps in place, so when you change gear, it doesn't let the fork shaft pop out of gear. If they wear away, or the spring is broken, then the gear stick pops out of gear when torque 'goes through' the shafts in the 'box. Hope you can understand all of this :)
Also when changing a clutch, or just taking the 'box off for some reason, check to see of there's any grease where the 'box's input shaft goes into the flywheel. When changing a clutch, it's important to have it aligned properly, so that the input shaft fits into it properly.
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #146 on: December 19, 2008, 03:08:57 PM »
only thing i didnt understand is "crown wheel and pinion" could you explain this in simpler terms? or a pic maybe  :oops:
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Guido the Fiat
« Reply #147 on: December 19, 2008, 04:53:13 PM »
Let's see... the big cog wheel and the 'cone' cog wheel. Also, when assembled, the distance between the cog teeth is important too. Too large, and the teeth don't interlock enough (i.e. it makes a loud whining sound, and teeth can break off), too close and the whole diff may jam.
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Guido the Fiat
« Reply #148 on: December 19, 2008, 05:11:13 PM »
o so thats where i scr**ed things up, i just replaced this whole assembly... thank you for the info  ;)
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Guido the Fiat
« Reply #149 on: December 19, 2008, 05:24:21 PM »
Darrell is so right about those bits . Only chuck the bits that are worn or damaged. I blamed my son for wrecking 4 gearboxes but when I got to strip them down different components had broken in each one so with the aid of a Haynes manual and a bit of selective mix & match I got two realy nice boxes up and running.  [-/