Author Topic: Back Camber  (Read 1278 times)

0 Members and 1 Guest are viewing this topic.

jon.hunt

  • Member
  • *
  • Posts: 89
  • Karma: 0
Back Camber
« on: January 19, 2008, 12:53:07 PM »
Hi
    Just wondering is there an Easy way to Reduce the Back Camber on a 126 as I've just fitted New Falken 165/60 R13 Tyres to alloy wheels and I'm assuming the Outside edge of the Tyre will wear First, but as there directional tyres I cannot have them Turned round.  In fact these were the Only tyres I could get to Fit other than Nankangs and there directional too.
                                             Jon.

MaLi

  • Super Member
  • ***
  • Posts: 151
  • Karma: 1
  • Location: Leceister
Back Camber
« Reply #1 on: January 19, 2008, 01:21:47 PM »
On rear you can play with the suspension height. By lowering camber goes negative.

On the front you can set camber by adding/removing spacers under the top wishbone.