Author Topic: Rust cant we call a trousse?  (Read 7102 times)

0 Members and 1 Guest are viewing this topic.

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Rust cant we call a trousse?
« on: June 15, 2006, 08:25:00 PM »
Any suggestions on best approach to take to this rust? as its even worse than the pics depict!















http://www.dropshots.com/day.php?userid=73614&cdate=20060615

Thanks
Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

Tommo32

  • Super Member
  • ***
  • Posts: 115
  • Karma: 1
Rust cant we call a trousse?
« Reply #1 on: June 15, 2006, 08:38:54 PM »
new panels are essential with that degree of severity

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Rust cant we call a trousse?
« Reply #2 on: June 15, 2006, 08:42:55 PM »
New panels I think Chris!
It's not worth patching up this type of corrosion, it will only come back!

Is that the 73 Fiat 126 you picked up the other day?

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Rust cant we call a trousse?
« Reply #3 on: June 15, 2006, 08:51:34 PM »
hi guys, thanks for your input, yes m8 this is the one i got the other day looks pretty from pics taken at a distance, but some nasty rust lurking throughout the car.

 :sad: new panels it is then...eventualy

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Rust cant we call a trousse?
« Reply #4 on: June 15, 2006, 10:07:58 PM »
Here is the old veng list, it may help you decide what panels will be required. How are the sills and inner sills?

click image to enlarge

slater

  • Super Member
  • ***
  • Posts: 215
  • Karma: 0
    • http://www.retro-rides.com
Rust cant we call a trousse?
« Reply #5 on: June 15, 2006, 10:33:09 PM »
looks like a full resto job, :shock:

 i have a genuine fiat front panel and wing for sale if its any use to you. :wink:

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Rust cant we call a trousse?
« Reply #6 on: June 15, 2006, 10:36:30 PM »
thats not bad cut it all out and fill it with papier mache lashings of glue and repaint it . then sell it on e bay to some un warry sod .

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Rust cant we call a trousse?
« Reply #7 on: June 16, 2006, 01:41:42 AM »
yer im thinking bit of aluminium mesh and isopon 38, rust treated with hammerties Kurust Gel, left to simmer for 2 hours, then primed with Davids zinc 182 before and after filler, with primer filler over top to glaze with top coat of paint, rubed down gently to remove imperfections in the texture with fine wetn dry, and buffed with a cutting compound, served with a sprinkle of chives and a honey dressing.

only kidding, :lol:  :lol:  im gona cut the rust, package it up and send it back to the Russians, and get some proper fresh metal in!! last time it will mess with me!!!  :D

 :smt067

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

paul harbinson.

  • Super Member
  • ***
  • Posts: 545
  • Karma: 0
Rust cant we call a trousse?
« Reply #8 on: June 16, 2006, 07:48:19 AM »
Here Chris thats superficial for  73'
Dante Giacoso, pure genius!

ChrisRLewis

  • Administrator
  • Super Member
  • *****
  • Posts: 1723
  • Karma: 25
    • Club126uk
  • Location: Swansea, UK
Rust cant we call a trousse?
« Reply #9 on: June 16, 2006, 10:37:38 AM »
Good luck with the work Chris!

I have done a few cars a lot worse than this. The secret is to do it in stages not all at once. If you cannot obtain any of the panels new perhaps you could salvage panels from another shell, does the Bis have the same panels?

Chris

Vin

  • Member
  • *
  • Posts: 25
  • Karma: 0
Rust cant we call a trousse?
« Reply #10 on: June 16, 2006, 11:13:54 AM »
Chris,

I have a pair of Genuine Fiat wings for the early cars (they wouldn't fit my FSM or a BIS) that you can have for nothing (would be to a good cause after all :D )

I'll PM you.

Vin
1978 900T Citivan, 1986 126 FSM, 1985 Panda 45CL, 1988 Panda 1000CL, 1991 Panda 750L, 2000 Brava SX 105 JTD

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Rust cant we call a trousse?
« Reply #11 on: June 16, 2006, 12:16:31 PM »
I,d suggest getting it blasted and primed to be honest if its that bad it will be hard to see the severity of the rust till its laid bare, as it looks like its been repainted more than once.....

then make a panel list then start at the front and work your way bto the back  :D
one resprayed and another arrives- double trouble BIS style!!

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
Rust cant we call a trousse?
« Reply #12 on: June 16, 2006, 05:27:05 PM »
hi guys, thanks for the help, it is a job and a half but at my brothers at present hes cleaed out his garage and giving me his MIG welder to use as well as some lessons.

Vin thats good of you m8, will chat to you about those, was good to see your pandas last weekend at autoitalia.

i was thining about cutting the spare wheel well out of a scrapsped BIS shell and welding that in, is that feasible? or shoddy?

Thanks again

Chris :D
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Rust cant we call a trousse?
« Reply #13 on: June 16, 2006, 09:34:49 PM »
Seen much worse. don't worry. sure you will get is sorted.

Shame my shell has gone now, front end was Ok.

fiatfsm

  • Super Member
  • ***
  • Posts: 675
  • Karma: 2
Rust cant we call a trousse?
« Reply #14 on: June 16, 2006, 10:39:00 PM »
If you can, use LMC Hadrian panels if no genuine available, as these are the best fit. Veng are really poor and need lots of fettling, trust me on that one mate!
1987 Fiat 126 FSM, alloys, clear lights, Polish tat accessories... love it!