Author Topic: Help  (Read 2804 times)

0 Members and 1 Guest are viewing this topic.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Help
« on: May 25, 2006, 09:14:25 PM »
Hi need help from one of the clever ones out there.

Have a look at this:

http://allegro.pl/item103629438_glowica_bambino_do_126p_po_obrobkach_3mm.html

Sold as aBambino head,  skimmed 3mm. New valves, polished (somethings). He has used it and says the temp stays engine temp stays cool is this going to just drop straight onto my engine of will I need to be clever to get it sorted?

Any help would be great,

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
Help
« Reply #1 on: May 25, 2006, 10:52:18 PM »
A late 126 (square) head will drop staight on. Though I'd steer well clear if 3mm really has come off. Why not go for a Panda 30 head instead?

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Help
« Reply #2 on: May 26, 2006, 06:46:53 PM »
Thanks a lot! Wasn't sure what is was.

Panda head is also for sale but he wants about 200 pounds!!!!!
Blimey are they really that expensive! the head I sent is only 30 pounds.

For 200 I can get a brand new 126 head, have the engine rebored to 700cc and get an oil cooler. all fitted by a mechanic and still have anough change for my disk brakes.

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Help
« Reply #3 on: May 26, 2006, 08:53:23 PM »
you will soon regret coming back to our lovely island with prices that low in poland just wait the min cost of a mechanic is £40+vat here!!!

PaulB

  • Super Member
  • ***
  • Posts: 333
  • Karma: 0
Help
« Reply #4 on: May 26, 2006, 10:49:13 PM »
My Panda modded head (trimmed to fit 126 cowling) was 400 euro, which broke down like this:

Quote
1) modified Panda 30 head complete, it is guaranteed, the ducts have been polished, the valves are corrected, the head is flattened, the relationship of compression is of 1/9, if you climb on the 126 pistons from mm77, cost euro 220,00
2) with the original Weber 30DGF , is revised guaranteed cost euro 70,00
3) manifold for  the original Weber 30DGF , cost euro 25,00
2) Pushrod tubes cost euro 24,00
3) Rubbers and gaskets, cost euro 21,00
4) short studs (free)
5) total 220+70+25+24+21 amount euro 360,00+ 40 including shipping,  final total  400,00  

A regular Panda 30 head would be cheaper. Postage was from Italy to UK