Author Topic: rear engine mount (the sprung one) (Read 3375 times)

mintex · « **on:** April 01, 2015, 04:42:06 PM »

Hi all.
do all the fiats use the same rear engine mounts, ive changed the front gearbox ones and its much better and looking at the state of them i guess the engine sprung one wont be much better so i want to change it.

Its this the set i need for my bis please?

https://webshop.fiat500126.com/katalog/artikelinfo/1720/set_of_rubber_bearings_for_engine_mounting_3_bearings

mintex · « **Reply #1 on:** April 01, 2015, 04:59:12 PM »

Or this one as

https://webshop.fiat500126.com/katalog/artikelinfo/2718/set_of_rubber_bearings_with_spring/2718

Gadge · « **Reply #2 on:** April 01, 2015, 08:21:14 PM »

I belive the BIS and aircooled mounts are different. I think there wider?

mintex · « **Reply #3 on:** April 01, 2015, 08:24:40 PM »

i cant seem to find anyone listing a rear mount for a bis

Bambino126 · « **Reply #4 on:** April 03, 2015, 06:29:26 PM »

if you find out, let me know because i've got to do mine too.

mintex · « **Reply #5 on:** April 05, 2015, 08:41:18 PM »

Will do, i plan to order one tuesday so once it arrives i will let you know

mintex · « **Reply #6 on:** April 11, 2015, 10:42:43 PM »

Well i bought a new mount.
Its not quite the same but it fits and it has reduced the vibration. It looks like the bis has a larger top rubber as it has a metal plate on the spring but with the new rubber i had to remove this.

The new one

The old one

old and new

old and new

scotty · « **Reply #7 on:** July 17, 2015, 11:42:05 AM »

How did you go on with the air cooled mount on the Bis in the end?

I've got to sort mine out. BOO!

mintex · « **Reply #8 on:** July 19, 2015, 07:48:18 PM »

It did fit but the top rubber is a little smaller and i had to leave out the metal plate out but it did the job. I never found anyone listing one for the bis but somebody must do

scotty · « **Reply #9 on:** July 19, 2015, 08:48:01 PM »

I've not found anywhere that sells them.

Thanks for that.
Mine pinged off after the thread stripped and I think I lost part of the rubber judging by the clunking I get in reverse and over bumps.

Think I'll order one and give it a whirl.

Bambino126 · « **Reply #10 on:** July 20, 2015, 04:15:19 PM »

http://www.fiatclassic.com/HTML126/KATA126U.HTM#engine

Item 1765

Is that the right one?

mintex · « **Reply #11 on:** July 20, 2015, 11:32:00 PM »

I dont think so, that looks like the same kit i bought

Author Topic: rear engine mount (the sprung one) (Read 3375 times)

mintex

rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)

Gadge

Re: rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)

Bambino126

Re: rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)

scotty

Re: rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)

scotty

Re: rear engine mount (the sprung one)

Bambino126

Re: rear engine mount (the sprung one)

mintex

Re: rear engine mount (the sprung one)