Author Topic: My baby  (Read 25811 times)

0 Members and 1 Guest are viewing this topic.

Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #45 on: May 11, 2015, 04:20:00 PM »
sad to finally admit it, but the car is on the hold for a while as I'm just starting my GCSE exams.... Speak soon and I'll update this as soon as j get back to work on it :)

Dom


Sent from my iPhone using Tapatalk

Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #46 on: May 18, 2015, 07:31:55 PM »
Right, had a few days gap in between exams so thought I'd get a bit done and posted :)

First took can shafts off....
^thats just a little too I found online lol



I'd been told the previous guy had already drained the oil....turns out not.... Was quite a shock lol



And then after removing the exhaust manifold, off came the heads, pistons look brand new, as if been informed already,

So that's it for today, exams Wednesday then got a week off so should be able to get it all split straight in half next week all been well :)

Dom


Sent from my iPhone using Tapatalk

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: My baby
« Reply #47 on: May 18, 2015, 08:28:22 PM »
God only knows how your gonna stuff that and a box in the back of a 126  :$

Good luck!  ;D
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #48 on: May 18, 2015, 10:52:44 PM »
It will fit gadge ;) measured it out, got around 2 inch either way of the engine lol, fast!

Once I've done some more work on it I'll be posting it up :)

Dom


Sent from my iPhone using Tapatalk

mwub90

  • Newbie
  • *
  • Posts: 10
  • Karma: 0
    • Youtube
  • Location: Littleport
Re: My baby
« Reply #49 on: May 20, 2015, 11:07:30 PM »
To give you a rough idea here's my single cam hovering in place. A very tight fit. I hope you've thought about shortening your sump.



Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #50 on: May 21, 2015, 08:01:10 PM »
Ahh right, very snug indeed! I have thought about shortening it already but not found a solution as of yet, due to exams, once I've completed them I have a 12 week "holiday" so while I'm not working I shall be devoting my time to it :) what have you done about the exhaust and radiators etc?

Dom


Sent from my iPhone using Tapatalk

mwub90

  • Newbie
  • *
  • Posts: 10
  • Karma: 0
    • Youtube
  • Location: Littleport
Re:
« Reply #51 on: May 23, 2015, 09:40:05 PM »
Mines n/a so I don't need to worry about a turbo, making my exhaust a lot easier to fabricate. Radiator is going up front with a grille cut into the front panel. Something else you'll need to consider is the alternator, the rear "cross member" is in the way, I'm thinking of getting a tiny race alternator and make a new or modify the bracket. Once I start making progress on my build I'll start posting.  Look on beetle engine swap sites. They've done the swap so many time its down to an art. Great place for top tips. Good luck with the exams.

126early

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: My baby
« Reply #52 on: May 23, 2015, 11:59:39 PM »
Hi, welcome to the forums! Upload some pictures for us all to see :D what year is your car?

Chris
Hi Chris, picture of the 126, the boot lid should be painted this week all being well, thanks John

dadandlad

  • Super Member
  • ***
  • Posts: 298
  • Karma: 8
  • Location: Halifax West Yorkshire UK
Re: My baby
« Reply #53 on: May 25, 2015, 01:47:14 PM »
How do you think they will handle with the extra weight at the rear

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: My baby
« Reply #54 on: May 25, 2015, 06:12:49 PM »
Like a camel with a firework up its a##e I imagine  ;D ....... It would almost certainly be undriverble over 40mph and unstable around corners with all that power - and that's if it fits in, which it won't because it's too tall and by the time a suitable gearbox is found it'll be too long so it will hang out the back even more. He has been warned  :D
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

dadandlad

  • Super Member
  • ***
  • Posts: 298
  • Karma: 8
  • Location: Halifax West Yorkshire UK
Re: My baby
« Reply #55 on: May 25, 2015, 08:20:56 PM »
 :D :D
Keep telling my son manufactures spend years designing a safe driveable car and he spends a couple of hours ruining it with performance modifications  :o :D

Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #56 on: May 25, 2015, 09:41:02 PM »
I thought you'd all had enough just ripping me?!

I know it's going to be a very hard project (that's if I ever do get it finished)

The truth is, non of us know how it may/will handle due to the fact it's a rare conversion, Im altering all shocks and springs etc for custom made ones, I am doing it all properly so if it needs money spending it shall get it.

By the end it may handle bad yes, it may only be fun in straight lines or it may even not work.

However I don't need comments such as Gadges above.

I got sick of it before with most of the forum against me, seems that nearly everyone on the forum is against any, and every suggestion I have, don't like my thread, don't read or comment....

So to answer these few question,
I plan to spend quite a sum of money on trying my best to make it handle to the edge of its capabilities.
I also intend to use my friends unit to try out several gearbox's and sizes in order to find the correct one to fit for my situation.

Sorry for the rant I just don't want people to just spend there time slating me before I've begun as they were before.  So I did as you say  "nipped it in the bud" 

Dom


Sent from my iPhone using Tapatalk

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
Re: My baby
« Reply #57 on: May 26, 2015, 07:30:08 AM »
Sorry Dom I know it's not what you want to hear but that's my take on this project. Part of this forum is about sharing your experiences and seeking advice and support and I just simply can't support it. It's all very well saying "if you don't like then don't read" but it's a public forum and if advice can be give then we, the reader, have the right to reply. There are people on here who DO know what they're on about and they have tried to give you advice but you don't listen :(

As I've said before I'm passionate about theses cars and there numbers are dwindling by the week by this very strange quest of trying to fit the most powerful and biggest engine inside one "just for fun" and the fact that you've just admitted that it may not work means that this (in my opinion) is a lost cause. I'm NOT against modifaction - just look at my car .

Sorry to poo poo your thread so I shall keep quiet in future. Good luck with your exams btw :)

« Last Edit: May 26, 2015, 07:34:40 AM by Gadge »
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

shielsy

  • Super Member
  • ***
  • Posts: 721
  • Karma: 0
Re: My baby
« Reply #58 on: May 26, 2015, 11:44:33 AM »
every one has a right to comment on a public forum, its why its public i like what your doing , but as am not mechanically minded i dont understand it but love it , i bust my balls doing mine and cant understnad why very few comment , but then thats the way its is ,
good work love it  :P ;)
 

Dom.kelltt

  • Super Member
  • ***
  • Posts: 132
  • Karma: 0
Re: My baby
« Reply #59 on: May 26, 2015, 08:45:03 PM »
I understand that, however, it's nice to have some. (If any) support from others on the forum.

It doesn't matter though, still going to go ahead with the build, if it works I'll be immensely proud of what I've created. If it doesn't work I shall just fully restore the 126 to standard.

Don't know how anyone can be mad about that?

But, enough arguing, it's happening and I'll inform people of my progress as it's made, Thankyou for your advice everyone

Dom


Sent from my iPhone using Tapatalk