Author Topic: Our first 126 Bis.....  (Read 2773 times)

0 Members and 1 Guest are viewing this topic.

Lioux

  • Newbie
  • *
  • Posts: 12
  • Karma: 0
Our first 126 Bis.....
« on: August 18, 2012, 06:48:11 PM »
Hello...
We got our first 126 this week, off Ebay and arrived on a trailer not sure how much work we have taken on!!  My 13 year old is very keen to get working on it which is great as he is very practical and doesn't mind getting his hands dirty and says that the car is just the right size for him ;D
Didn't know if the engine was seized but a £15 battery from the scrap yard turned it over and had it sort of running!  Hoping to spend some time tomorrow draining all the fluids and giving it a good clean - which will probably double its value 8)
Need to replace a few bits and bobs on it and unfortunately one of the rear light covers must have fallen off on the journey down the M5!
Will try to upload some photos of our progress
Looking forward to having fun driving it hopefully soon.....
« Last Edit: August 18, 2012, 06:57:26 PM by Lioux »

ypsilon_lancar

  • Super Member
  • ***
  • Posts: 187
  • Karma: 0
Re: Our first 126 Bis.....
« Reply #1 on: August 18, 2012, 09:24:36 PM »
Welcome!!!  :welcome


Tate

  • Super Member
  • ***
  • Posts: 211
  • Karma: 3
Re: Our first 126 Bis.....
« Reply #2 on: August 19, 2012, 09:49:59 AM »
Welcome and keep us updated  :good:
Fiat 126 -73 project
2 x BMW E21

Lioux

  • Newbie
  • *
  • Posts: 12
  • Karma: 0
Re: Our first 126 Bis.....
« Reply #3 on: August 19, 2012, 02:53:38 PM »
We have drained the coolant and fitting an inline fuel filter as recommended.....before we start it again.
I have a question... the cover that goes on top of the carb between it and the airfilter is missing, what is this bit called, do I need one and where can I get one??   :$
Ta x

Da Londo

  • Super Member
  • ***
  • Posts: 287
  • Karma: 0
  • It's not the carb size that matters, it's the jet
    • Fiat 126 blog
  • Location: Maasmechelen, Belgium
Re: Our first 126 Bis.....
« Reply #4 on: August 22, 2012, 09:46:58 AM »