Author Topic: My next upgrade cv joint upgrade  (Read 3209 times)

0 Members and 1 Guest are viewing this topic.

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
My next upgrade cv joint upgrade
« on: January 30, 2012, 07:46:44 AM »
Looks like a worth while investment rather than those crappy aluminium blocks looks easy to fit


http://www.motomax.pl/eng/index.html

Ricambio sell them for £55 I think that's each.


Here's the fitting distructions

http://www.motomax.pl/eng/fiat126/instr_126p/instr_126_eng.html
Neil gargaro

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: My next upgrade cv joint upgrade
« Reply #1 on: January 30, 2012, 08:27:28 AM »
 They look like a good idea, and I was also thinking about these couplings on the CCZero.
 The 126Fan guys sell the whole kit now for 130 Euros.
 http://www.126fan.sk/eshop/index.php?main_page=product_info&cPath=10_25&products_id=780
1972 Fiat 500
1980 Fiat 126

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: My next upgrade cv joint upgrade
« Reply #2 on: January 30, 2012, 01:21:15 PM »
I fitted them to my Gamine after replacing 3 on a round trip to Garlenda 3000 miles.  Had trouble fitting to one side, had to drop the swing arm, but have had no problems since.  You can also get them for the output shaft from the gearbox.  I bought mine direct from the factory.

Ralph

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: My next upgrade cv joint upgrade
« Reply #3 on: January 30, 2012, 01:25:06 PM »
Puddle jumper you kept that quite any mods that can help out surely should be advertised! :P where's the direct link from the factory?
Neil gargaro

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: My next upgrade cv joint upgrade
« Reply #4 on: January 30, 2012, 10:26:09 PM »
Here: http://motomax.pl/eng/index.html
The units are 91 euro plus postage, if you go to ebay italy or Germany they come up regularly.  The postage from Italy is generally cheaper.  The first photo shows the tri housing unit attached to the stub axle nyloc nut on in reverse. The second shows the problem I had, look at the previous post showing the installation for the difference.  I know of other fitted to 500's which were straight forward.

Ralph
« Last Edit: January 30, 2012, 10:33:01 PM by thepuddlejumper »