Author Topic: 126 in Australia  (Read 2026 times)

0 Members and 1 Guest are viewing this topic.

sfrb

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
126 in Australia
« on: December 30, 2011, 05:11:43 AM »
Hi

Can anyone help identify where this car is made? rego says 1983 but cant find any date plate. Model number says 126a.

Any help appreacited!

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: 126 in Australia
« Reply #1 on: December 30, 2011, 08:33:49 AM »
Hello, welcome

There should be a chassis plate inside the boot (RHD, so on the driver's side near the dash cluster). That plate has the chassis no. , paint no. and model year. There's also a seperate chassis no. stamped into the bodywork inside the boot, either on the right hand suspension tower (on early models) or near the middle of the boot (might have to lift up the rubber carpet to see it, though there should be a flap on the carpet which will reveal the number).
If it says FSM on the chassis plate then it was made in Poland.
« Last Edit: December 30, 2011, 08:37:10 AM by GTMaster »
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: 126 in Australia
« Reply #2 on: December 30, 2011, 12:00:38 PM »
Hi, good to see another sydneysider.

It could well be an italian model, I know quite a few were imported privately back then, but as per GT's instructions to check and be sure.

No plastic moulds and the smaller air cooling vents would say its an early 80s model but it could also be a customised niki.
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace