Author Topic: Will these fit  (Read 5178 times)

0 Members and 1 Guest are viewing this topic.

taz24v

  • Member
  • *
  • Posts: 36
  • Karma: 0

taz24v

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Will these fit
« Reply #1 on: November 04, 2011, 11:48:50 AM »

 :cry:

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Will these fit
« Reply #2 on: November 04, 2011, 12:16:52 PM »
They look like they should, but being aftermarket you could do with asking the seller the PCD and the center bore, just to be sure. PCD should be 4x98, and I *think* the centre bore is 58.1mm.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Will these fit
« Reply #3 on: November 04, 2011, 12:41:34 PM »
Seems a bit strange having Japanese wheels that will fit a Fiat but if they were fitted to a 600 then I would guess they would fit a 126 but it might have been a "wobble bolt" fixing. Also if you see the guys revision on rim width 3.5J is Fiat 500 size and 0.5 inches narrower that a standard 126 rim  :$

taz24v

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Will these fit
« Reply #4 on: November 04, 2011, 02:25:55 PM »
Many thanks for your help. I'll give them a miss & wait for something else to come up.

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: Will these fit
« Reply #5 on: November 05, 2011, 01:08:32 AM »
These wheels are from a SEAT, cant remember the model name. Pretty sure the PCD would be the same, not sure about offset, rim width and centre bore though. The 3.5 seems very skinny for an alloy rim. As Rusty said if they came off a 600 then they should fit. You could always ask for photos of them fitted to the 600! ;)
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Draigflag

  • Super Member
  • ***
  • Posts: 374
  • Karma: 0
  • Got a New Abarth 500 too!
Re: Will these fit
« Reply #6 on: November 05, 2011, 02:58:57 PM »
SEAT Marbella maybe? Based on the old Panda?

taz24v

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Will these fit
« Reply #7 on: November 09, 2011, 07:49:18 PM »

well they fit but still not sure what they are, any idea's?





gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: Will these fit
« Reply #8 on: November 10, 2011, 07:13:55 AM »
Well thats got me stumped  :o I dont know of any japanese cars with a 98 pcd, so they well may be a 100 pcd. But I could be wrong again. :$
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

Draigflag

  • Super Member
  • ***
  • Posts: 374
  • Karma: 0
  • Got a New Abarth 500 too!
Re: Will these fit
« Reply #9 on: November 10, 2011, 07:08:42 PM »
Sorry to crash a thread again! But these are the correct fitment for the 126 BIS are they?

http://www.ebay.co.uk/itm/FIAT-OE-STEEL-WHEEL-RIM-SET-4-NEW-13-4X98-ET35-SEICENTO-PUNTO-PANDA-UNO-/260891411715?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item3cbe570503

I want a new set like this, not sure they'll arrive safe from Poland though, what do you think?

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Will these fit
« Reply #10 on: November 10, 2011, 07:19:44 PM »
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Will these fit
« Reply #11 on: November 10, 2011, 08:46:00 PM »
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.

New pandas aren't 12". Also 3.5 j's are thinner than a Fiat 500, never seen them before, very unusual!!
Rust does not discriminate

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Will these fit
« Reply #12 on: November 10, 2011, 09:59:25 PM »
They look like standard Panda (new) steelies to me (ET35 is too big to be Seicento), they'll fit a BIS no bother and I dare say you'd get them cheaper from a scrapyard in the UK.

New pandas aren't 12". Also 3.5 j's are thinner than a Fiat 500, never seen them before, very unusual!!

I was replying to DraigFlag, rather than the OP ;)

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: Will these fit
« Reply #13 on: November 10, 2011, 10:35:01 PM »
Should have paid more attention!!
I have a set of mk1 punto wheels. They look identical.
I got mine for £35 with a good set of tyres on them. Paint is nowhere near as good, but I can sort that out myself.
Thing I've found with steel wheels is when you need a set, you can easily pay too much, but if you can wait until someone needs rid of a set, then the price will be much better.
Rust does not discriminate

Draigflag

  • Super Member
  • ***
  • Posts: 374
  • Karma: 0
  • Got a New Abarth 500 too!
Re: Will these fit
« Reply #14 on: November 11, 2011, 07:52:30 PM »
I've been looking for over a year for any kind of set, i'm not even fussy, just anything better than those plastic hub caps! Ideally though, something in perfect condition to match the rest of the car, that's why i thought those steelies would be ok. But yea, they are too dear