Poll

tuning a standard engine?

tuning
2 (100%)
re build
0 (0%)

Total Members Voted: 2

Author Topic: engine rebuild  (Read 2816 times)

0 Members and 1 Guest are viewing this topic.

Tommybsmith

  • Member
  • *
  • Posts: 30
  • Karma: 0
engine rebuild
« on: October 30, 2011, 07:13:25 PM »
Hi all, im new to the forum & in the process of re-building my 650cc aircooled polski 1979.
Iv owned it a few months now, iv got it through its mot after a few little jobs (new kingpin, wheel bearings, clipped out brakelines etc)
I took it out for a drive last week for the first time & it completly overheated! the engine is now seized but should be completly stripped down tomorrow if all go's to plan!! Our first thought for the cause of engine failure was fan failure but after taking the head off & removing the sump we found it to be in good order.
We're guessing its the thermostat failing to operate the flap thats caused it to over heat now!??
Im hoping to get some advice from fellow 126 owners when re-building the engine, im wanting to keep it original but was thinking about boring the cylinders out & fitting new pistons? as the old ones are quite bad & the rings are gone, crank bearings gone aswel!!!
I was thinking of upgrading the carb aswel with maybe a webber?
But heres the big question!!! Has anyone on here fitted a supercharger to an air cooled?
Thats my plan!!!! Any advice would be greatly appreciated
THANKS
 

 

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: engine rebuild
« Reply #1 on: October 30, 2011, 07:49:35 PM »
If the car is the one I think it is, I thought the engine was a new one, or at least totally rebuilt.

Maybe I am thinking of the wrong car.


Mmmmmm so did you say you were keeping it original or fitting a supercharger? :-X

Tommybsmith

  • Member
  • *
  • Posts: 30
  • Karma: 0
Re: engine rebuild
« Reply #2 on: October 30, 2011, 07:56:51 PM »
Hi, thanks for the reply, yes the engine has definately had work done on it & i think it was a total re-build.
Im not sure on the history of the car as its an import & was bought at auction by the person i bought it off.
Have you seen the car before?? hmmm interesting
Yeh im wanting to keep it as original as pos with a supercharger?

DEYAN IYI

  • Super Member
  • ***
  • Posts: 418
  • Karma: 2
    • Bulgarian Polski FIAT 126p Fanclub
  • Location: Plovdiv/Bulgaria
Re: engine rebuild
« Reply #3 on: October 30, 2011, 08:42:16 PM »
As original as pos with a supercharger is something impossible ;D Reliable crankshaft, con rods and pistons needed. Aisin AMR300 is our compressor. Renault 5 GT Turbo carb. Small intercooler and so on.

On the picture - a little beast.


nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: engine rebuild
« Reply #4 on: October 30, 2011, 08:47:14 PM »
Any videos of that running ?
Neil gargaro

DEYAN IYI

  • Super Member
  • ***
  • Posts: 418
  • Karma: 2
    • Bulgarian Polski FIAT 126p Fanclub
  • Location: Plovdiv/Bulgaria
Re: engine rebuild
« Reply #5 on: October 31, 2011, 06:02:18 PM »
I can't find any 126/500 compressor videos, but here comes another one - listen to the music ;)

http://www.youtube.com/watch?v=S2TUt60Vf34

And one running:

http://www.youtube.com/watch?v=Hltz9KX33yg

Subaru Vivio RX-R promotion video:

http://www.youtube.com/watch?v=Wi7HGIpKdeM