Author Topic: running sweet as a nut (for now)  (Read 5209 times)

0 Members and 1 Guest are viewing this topic.

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: running sweet as a nut (for now)
« Reply #15 on: June 29, 2011, 09:04:04 PM »
I bought mine off flea bay and all that happens is it is wired to the posative side of the coil, negative to earth, key on it comes-on, key off it goes off.

The cam I got for £200 from a 500 guy who was leaving the country, I'll dig-out the ticket he had on it but 40 was one of the numbers it had on it.

My only concern now is it seems to make alot more power at higher revs and that is when things start to rattle apart on my bug as I havn't had the time or resources to do the super dynamic balancing black magic on my crank etc which I think now is the next step.
Might cheat and get the crank out of the spare engine I bought done and then swap it over  ;D
It's crazy how it'll go way past 60mph but things start to break past 60mph.
Maybe I should start a piggy bank for the 5th gear conversion..
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #16 on: June 30, 2011, 06:20:35 PM »
Well i brought a electric full pump and glass filter went to fit it and my fuel hoses fitted on the 24th of this month have started breaking down! They are all squishey and sticky and the fuel filter is full off little blobs!!!  >:(

So I've taken the hose back and changed it so I will change the fuel lines and pump later. Not happy ??? I've got to take the fuel tank off again.....
Neil gargaro

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: running sweet as a nut (for now)
« Reply #17 on: July 01, 2011, 09:12:09 AM »
Bugger!

'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #18 on: July 01, 2011, 06:41:29 PM »
She's alive ;-) I got round to changing the fuel lines fitted the pump and she's purring like a cat :-) first try aswell!! Crapped myself thoe  when I first started it, there was  petrol everywhere I thought it was pissing out the carb but it was the remainder left in the mechanical pump lol  :$

I went for a drive about 20 min sat at 60down the dual carriage way dropped slightly at a hill but
Nothing like before. Now All I get is a little mis/pop when slowing down on the gears and when sitting at ideal But I'm sure that's just down to tuning?

Ive left the Mech pump in place for the
Moment but I'm gonna remove that later, there was a bit of suction there but nothing to write
Home about.

Overall Im as happy as a pig in xxxx    :P I dont know why I waited so long to change the pump...


Neil gargaro

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: running sweet as a nut (for now)
« Reply #19 on: July 01, 2011, 06:51:09 PM »
 ;D ;D ;D ;D ;D

I found mine miss/pops when the points are about to close-up

Now it's on electronic ignition it seems to have completely gone.

Your starter is going to love that new pump  ;)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #20 on: July 01, 2011, 07:19:03 PM »
sounds like my next investment  ;D   
Neil gargaro

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #21 on: July 01, 2011, 09:11:01 PM »
I think a new carb maybe first I've blown the brass insert out on the return hose off the carb covering the whole engine bay in petrol :-(  I've pushed it back in I hope it holds out for the return trip home.

Too much pressure from the pump or just unlucky?
Neil gargaro

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: running sweet as a nut (for now)
« Reply #22 on: July 01, 2011, 10:20:45 PM »
Ah that happens, not the first nor second time I've heard of that.

I had a carb without one of those brass hose adaptors in, the one in an old fuel pump I had looked about the same so I warmed-up the pump (after stripping it down) and it popped-out. I then warmed-up the carb body and pushed it in, a few taps to be sure and it seems good.

Unfortunately changed that carb for a Dellorto FZD.

Keep an eye on it, did you instal a fuel pressure regulator?
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #23 on: July 01, 2011, 11:32:44 PM »
No I was told it wasn't necessary by the company i brought it from as it has a return of the carb and such low pressure (2.5-3.0 off the top of my head)

I dont want tha happning again i was lucky the car didn't burst into flames there was loads of petrol everywhere by the time I had stopped in a safe place.

I've got some liquid metal you think that will hold it into place.

Neil gargaro

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: running sweet as a nut (for now)
« Reply #24 on: July 02, 2011, 12:09:14 AM »
I'm not sure about liquid metal, maybe someone else can comment on that, I didn't use anything, just a bit of warmth from a hot air gun.

Not sure about the pump you have. maybe if the pressure doesn't go up too high it'll be ok?

I installed a regulator as a precaution and have to confess the FZD carb seems to prefer a specific pressure setting I'd have to walk to the car to tell you as cannot remember it off the top of my head.

Too little pressure it wouldn't keep-up with demand and too much raises the float bowl level.
You can check the float level with a piece of clear hose onto a fitting you screw into the drain (a bike trick)
In theory I guess at a max of 3psi you don't need a regulator. Sometimes I think 126's should have cameras fitted in the engine bay with a screen on the dash so as to see what is going on :)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Allan

  • Super Member
  • ***
  • Posts: 226
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #25 on: July 02, 2011, 06:34:30 AM »
Some Fiat models (don't ask which because I can't remember) used a Y type junction in the fuel line, the smaller part of which was a return line to the tank. This meant that a constant pressure was maintained at the carb and excess was returned to the tank.

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #26 on: July 05, 2011, 05:36:08 PM »
ive given the tinkering on the engine a rest for a bit and i thought i would have a play with the dash and the electrics.

what do you think?







i cant imagine it would be everyones cuppa tea but i like it...  :P
Neil gargaro

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: running sweet as a nut (for now)
« Reply #27 on: July 05, 2011, 05:53:34 PM »
Mmmm, I like it, wouldn't do it in mine but looks clean. Great job!!

Emin

  • Super Member
  • ***
  • Posts: 123
  • Karma: 0
Re: running sweet as a nut (for now)
« Reply #28 on: July 05, 2011, 09:47:52 PM »
Looking so tidy and clean, job well done. :)

I don't like the padding on Bis dash so i consider similar (no)padding when i have a bis.

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: running sweet as a nut (for now)
« Reply #29 on: July 05, 2011, 10:21:07 PM »
I'm glad someone likes it! If your going todo it don't use carpet glue like I did as it's lifted slightly with heat I would suggest a contact adhesive like Evo stick.
Neil gargaro