Poll

Is there a manual for the above? We want to remove the engine to start restoration, where can we get instructions please?

wanted
0 (0%)
workshop manual
1 (100%)

Total Members Voted: 1

Author Topic: Workshop manual for 126 Bis 1989  (Read 4784 times)

0 Members and 1 Guest are viewing this topic.

adrian

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Workshop manual for 126 Bis 1989
« on: June 15, 2011, 12:15:06 PM »
We want to remove the enigine from a 1989 126 Bis and would like to follow a manual. Is there one available - or a set of guidelines somewhere please? Adrian and Oscar.


jokke

  • Super Member
  • ***
  • Posts: 157
  • Karma: 1
Re: Workshop manual for 126 Bis 1989
« Reply #2 on: June 15, 2011, 03:38:41 PM »
1980 Mazda RX626
1985 Mazda RX7
1998 Fiat 126p V6

ape20ff

  • Member
  • *
  • Posts: 36
  • Karma: 0
Re: Workshop manual for 126 Bis 1989
« Reply #3 on: June 15, 2011, 04:16:04 PM »
Hello.
There is another link on forum with all 126 manuals.
You're lucky because there is the 126 bis one in english.
http://fiat126.hu/?p=364&g=142
Here all the manuals but in hungarian
http://fiat126.hu/?/Fiat126/Konyvek/
And an Haynes in english abot old 126s:
http://www.megaupload.com/?d=Q40QSSE3
And I've just found manuals for other cars too,if somebody can need them:
http://ficoforum.forumotion.net/search?search_keywords=126+manual
See you

adrian

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: Workshop manual for 126 Bis 1989
« Reply #4 on: June 15, 2011, 05:18:40 PM »
Thank you all very much. This is the first time I have ever 'posted' anything and I am very impressed by such quick responses!

nrg19uk

  • Super Member
  • ***
  • Posts: 579
  • Karma: 1
Re: Workshop manual for 126 Bis 1989
« Reply #5 on: June 15, 2011, 05:32:46 PM »
If you click the subscribers section at the top of page for a small fee there's a variety of manuals for free and the fee helps towards the running cost of the site.
Neil gargaro

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Workshop manual for 126 Bis 1989
« Reply #6 on: June 15, 2011, 05:57:34 PM »
Ditto what the other guys have said . What is the reason for removing the engine ?

adrian

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: Workshop manual for 126 Bis 1989
« Reply #7 on: June 15, 2011, 06:17:40 PM »
We are hoping to put into the 'other' Bis that has no engine but much better body. Thanks again.

dread

  • Member
  • *
  • Posts: 27
  • Karma: 0
Re: Workshop manual for 126 Bis 1989
« Reply #8 on: June 21, 2011, 06:02:40 PM »
not done with the bis well not replaced with pipes and wiring. but the actual engine swap is not too hard. with wirng and pipes. in the past i have made up a key/legend with diferant coloured tape (electrical tapes) to mark/show where what is supposed to go.
how ever at the mo, on the bis trike. i have no electrics or plumbing at all. so i'm a lot lost, LOL. :o