Author Topic: HELP Please.  (Read 4254 times)

0 Members and 1 Guest are viewing this topic.

Kipster

  • Super Member
  • ***
  • Posts: 114
  • Karma: 0
HELP Please.
« on: April 30, 2011, 11:04:57 PM »
I really do need a piece of glass for my 126  :cry:.
i broke the small nearside front opening pane last week, really sad about it.
Thing is i have promised my Niece that i will use the car to take her to her wedding on the 26th May (i am proud as i am giving her away)!
I am willing to pay, or can anyone please let me know where i may be able to lay my hands on a pane?

thanks in advance. Cliff.

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: HELP Please.
« Reply #1 on: May 01, 2011, 12:38:03 AM »
If you get stuck, get hold of some 3 to 4mm perspex make a template and cut it with a fine blade jigsaw until you get an original one.

Have you checked on Ebay someone may be dismantling one.   
Pete.      il cavallo piccolo

Kipster

  • Super Member
  • ***
  • Posts: 114
  • Karma: 0
Re: HELP Please.
« Reply #2 on: May 01, 2011, 12:54:50 AM »
Thanks Pete.
Never thought of perspex.
Nothing on ebay at the moment, but i look daily.

Regards Cliff.

Think i may have annoyed my best local contact by accidentally leaving him bad karma, i am a twit with computers 47 now. I was trying to leave good Karma, but i think i clicked on the wrong thumb.
Oh well, life goes on...But i am sorry. (i have now corrected it)

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: HELP Please.
« Reply #3 on: May 01, 2011, 09:12:43 AM »
I may know where there is one  ;)

I will check the garage today. Let you know this evening.


landyman

  • Super Member
  • ***
  • Posts: 127
  • Karma: 2
Re: HELP Please.
« Reply #4 on: May 01, 2011, 10:55:37 PM »
will have one how do you remove it from door without breaking it :thumbup???

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: HELP Please.
« Reply #5 on: May 02, 2011, 07:13:48 AM »
I have a drivers side one.

Easy to remove screws on the edge of the door and it comes out whole, frame too.

Kipster

  • Super Member
  • ***
  • Posts: 114
  • Karma: 0
Re: HELP Please.
« Reply #6 on: May 02, 2011, 09:05:58 PM »
Thanks all.
Dave, will the drivers side fit passengers side if fittings are swapped?
Regards Cliff.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: HELP Please.
« Reply #7 on: May 02, 2011, 09:16:10 PM »
Mmmmm not sure, you are welcome to have a look.


Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: HELP Please.
« Reply #8 on: May 03, 2011, 08:20:50 AM »
Hi Cliff,
I checked my shed as soon as you put up your request but I also only have the driver's side and the bad news is that they are handed in the way that they curve so good luck with your hunt  :)

Kipster

  • Super Member
  • ***
  • Posts: 114
  • Karma: 0
Re: HELP Please.
« Reply #9 on: May 03, 2011, 07:53:00 PM »
will have one how do you remove it from door without breaking it :thumbup???

I dont think im the person to ask  :D.
maybe someone else can advise?
I will be willing to pay for it if you can remove it

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: HELP Please.
« Reply #10 on: May 03, 2011, 08:48:46 PM »
I used my 500 for our wedding, made the day a little more special!
I have a passengers side with frame.
The locking clip is broken, but if yours is still intact you can tap out the rollpin and swap them over.
I removed it without damaging it so it should go in ok, but I'd advise an impact driver for the 2 screws as they do take a bit of shifting.
I'll take £5 plus postage.
I can pack it up tomorrow and get a postage price, but it should be around a fiver.

PM me your address if you're interested
Rust does not discriminate

vavreklam

  • Newbie
  • *
  • Posts: 6
  • Karma: 0
Re: HELP Please.
« Reply #11 on: May 05, 2011, 07:10:44 PM »
 Hello!
 I am an owner I am an 126-Hungarian.
 I'm looking for used car parts in England.
 Could someone help?
 I would be very grateful.
 László Vavrek
 Hungary
« Last Edit: May 05, 2011, 11:25:53 PM by vavreklam »

vavreklam

  • Newbie
  • *
  • Posts: 6
  • Karma: 0
Re: HELP Please.
« Reply #12 on: May 05, 2011, 11:35:53 PM »
Hello "dejwid"!
have an old 650, low km hour.
Right mate, English car should chart the shelf.
I send a picture of my plan.
What is your email adress?
Any expenses are paid.
Can you help?
Laszlo Vavrek Hungar

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: HELP Please.
« Reply #13 on: May 06, 2011, 10:13:21 PM »
Üdv Vav

Ha kell valamilyen alkatrész akkor tegye fel kérdését a Wanted részben (126 parts wanted cimszó alatt pl.), ott biztosan kap valamilyen választ.

Minden jót, sok sikert a keresésben.
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

landyman

  • Super Member
  • ***
  • Posts: 127
  • Karma: 2
Re: HELP Please.
« Reply #14 on: May 08, 2011, 12:25:16 AM »
did you get sorted with glass yet ?