Author Topic: is my head man enough for a dellorto?  (Read 2969 times)

0 Members and 1 Guest are viewing this topic.

AlleyNiki

  • Super Member
  • ***
  • Posts: 163
  • Karma: 0
is my head man enough for a dellorto?
« on: April 15, 2011, 04:48:59 AM »
Hi guys,

I know this may have been covered somewhere but I couldn't dig up the topic.

Anyhow, my head has inlet valves of 33.0mm and 28.0mm for exhaust. It's standard 1989 650cc a/c.

Will fitting a Dellorto FZD 30/24 on it give me any more performance gain without altering the head?

(I think my mechanic mentioned he machined the head so maybe it's been skimmed..)

I suppose theres a sports cam out there to compliment it as well.. although some people are saying the sports cams only give more power in the upper (7000rpm) range...

Will drink an Aussie beer to anyone who helps!!

Alastair

Allan

  • Super Member
  • ***
  • Posts: 226
  • Karma: 1
Re: is my head man enough for a dellorto?
« Reply #1 on: April 15, 2011, 09:55:21 AM »
Fosters or XXXX

Aaron

  • Super Member
  • ***
  • Posts: 232
  • Karma: 0
Re: is my head man enough for a dellorto?
« Reply #2 on: April 15, 2011, 10:25:32 AM »
My guess is it will be Coopers considering he's from Adelaide.  Forget Fosters, that's purely 'for export' stuff (basically cause nobody drinks it in Oz cause it's cr@p).  It's a bit like Mexicans not touching Corona

AlleyNiki

  • Super Member
  • ***
  • Posts: 163
  • Karma: 0
Re: is my head man enough for a dellorto?
« Reply #3 on: April 16, 2011, 02:17:49 AM »
James Squire Golden Ale, actually :P

AlleyNiki

  • Super Member
  • ***
  • Posts: 163
  • Karma: 0
Re: is my head man enough for a dellorto?
« Reply #4 on: April 16, 2011, 06:40:13 PM »
Upon doing more research I'm concluding that this carb will not do much without grinding the inlet ports.


smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: is my head man enough for a dellorto?
« Reply #5 on: April 16, 2011, 06:52:32 PM »
Wow 4X it is,

Now 30mm port is fine it's the rest off the head you need to sort. I here all sorts off claims that opening the port where the carb bolts on makes more power, sorry but this is crap. The carb will benifit your engine but the head worked correctly will compliment your carb to each other more.

I think I might offer a Modded Head service, what do you think?
air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: is my head man enough for a dellorto?
« Reply #6 on: April 16, 2011, 07:09:47 PM »
 Head service?
 I`m sure this would be very successful... ;D
1972 Fiat 500
1980 Fiat 126

smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: is my head man enough for a dellorto?
« Reply #7 on: April 16, 2011, 07:17:51 PM »
We are talking Cyclinder head service :$
air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: is my head man enough for a dellorto?
« Reply #8 on: April 16, 2011, 08:22:48 PM »
Let is know when this service begins and I will pop over with head for sorting.

AlleyNiki

  • Super Member
  • ***
  • Posts: 163
  • Karma: 0
Re: is my head man enough for a dellorto?
« Reply #9 on: April 17, 2011, 05:37:32 AM »
I would be very interested however I would be very tired after flying all the way to England.