Author Topic: 1990 Fiat 126 Pickup Conversion  (Read 20712 times)

0 Members and 1 Guest are viewing this topic.

Madd

  • Member
  • *
  • Posts: 70
  • Karma: 0
  • Poland
    • Street-Roulette
Re: 1990 Fiat 126 Pickup Conversion
« Reply #30 on: December 11, 2010, 10:47:38 PM »
Quote
Colour is your choice but have to agree - not pink.

Exactly!

Fiat 126 RHD & BOSMAL :) in Poland

Instagram: @madd.moss

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #31 on: December 12, 2010, 03:33:41 AM »
Cheers fella! I was thinking i may blend the arches in and paint it white with black weller wheels? I recon it would do it abit more justice but its still not a very tough colour but defaintly classier i think?

andyowl

  • Newbie
  • *
  • Posts: 3
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #32 on: December 18, 2010, 09:43:40 AM »
I'm firmly in the "Brilliant" camp! Dare to be different!

I did the same to a Renault 4 Some years ago. The "objectors" are hugely outnumbered by the supporters!

Well done again!

Andy

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #33 on: December 26, 2010, 08:49:20 PM »
Thanks matey! :) exactly my way of thinking "dare to be different" ive got the time, (i like to think ive got the skill), the money and the balls to do it, so why the hell not!

I used to really be into radio controlled cars, and some of my cars cost over twice what this has cost me, so really now im older, instead of wasting my money modifiying rc cars, why not do it to real cars?! If anything its far more rewarding :) haha

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #34 on: January 02, 2011, 05:38:12 PM »





Bet you cant guess whats coming next?
.
.
.
.
.
.





Its not slammed yet, but its lower and i do have some negative camber :) the engine conversion will bring the rear lower anyway, and because the back end is lighter than a normal 126 it didnt lower it quite as much, but i think its an improvment :)

markymarc

  • Super Member
  • ***
  • Posts: 571
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #35 on: January 04, 2011, 10:42:58 AM »
Looks good, did you just cut the springs down? If so by how much as I would like to do the same. Are you going to lower the front? Im just wondering how to do this on a BIS as it seems abit confusing which route to go!!

Love the pick-up by the way, your doing a grand job

marc

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #36 on: January 04, 2011, 12:35:56 PM »
Yeahh i did cut the springs, by a coil and a half, it didnt bring the back down as much as i expected, but i think thats because it doesnt weigh as much as a standard 126 anymore, but im pretty happy with the ride height :)

I started the front yesterday but it didnt lower it as muc as i wanted either, so im going to cut down the coil mounting blocks, and i read somewhere about turning one of the leafs upside down? I removed it but it only lowered it half an inch, and i want to drop it atleast 2!

So anymore ideas would be appreciated :)

And thankyou! its coming along slowly, still need to tidy it up and it will  most likely be repsrayed black now, im thinking of resale-ability, if thats a word haha

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #37 on: January 04, 2011, 10:37:39 PM »
Darrell put up a thread with a link in it on how to lower a front leaf spring. Its the best method i've ever seen. Had a quik look on the forum but couldnt find it again. You might have more luck(time).

The black sounds like a better colour choice, hope your panel beating skills are up to the colour :oops:
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #38 on: January 04, 2011, 10:41:50 PM »
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #39 on: January 07, 2011, 05:06:27 PM »
Ive seen that page before! Although i havent got a fancy hydraulic press so id have to go for the old 2 bricks and a hammer method he was talking about :P but it is a very good idea :)

And they should be! I had a mini which i sprayed black and i was very impressed with the way it turned out for a first time in the garage jobby, and that was over 3 years ago, ive learnt alot since then, so fingers crossed this will end up better :) might even try and get a little bit fancy with the paint job, but that will be revealed when the time comess haha

gsxr126

  • Super Member
  • ***
  • Posts: 405
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #40 on: January 08, 2011, 12:31:02 AM »
I'll try using a bottle jack and a jig that i'll have to make.

I didnt mean to deter you by asking about your skills, its just that black is the hardest colour to paint. Good to hear the garage jobby will turn out well.

Heres my 2nd & 3rd attempts at painting a car.
The Good - White Niki all Std Daily Driver, The Bad - Black Niki GSXR1300 BMW diff & suspension, The Ugly - Red Niki quietly Rusting In Peace

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #41 on: January 09, 2011, 05:23:43 PM »
Well ive lowered the front again, and its dropped more :) i would like another inch, but i still havent trimmed the alloy blocks yet, so if it doesnt settle any lower after driving it i may do that eventually, had to cut the bump stops in half though haha.
I bassically just turned one of the leafs around and made sure it was secured properly and it seems to have done the job :)

And yeah black isnt the easiest, but as i say i sprayed my old Mini gloss black, and ive also sprayed my old Derbi Senda satin black, and i sprayed my Civic satin black aswell :) haha, i have a thing about black!

And they look amazing! I would be very proud of them, well done!

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
Re: 1990 Fiat 126 Pickup Conversion
« Reply #42 on: January 29, 2011, 04:37:12 PM »
i just hope you have a friendly mot man as that cutting bits off means a biva test if you are unlucky.

It's an interesting point. biva test is only applicable to cars. If it's class has been changed to a pick up then it can't be biva tested. Not sure how you get this through.
Rust does not discriminate

mt2man

  • Member
  • *
  • Posts: 42
  • Karma: 0
Re: 1990 Fiat 126 Pickup Conversion
« Reply #43 on: February 05, 2011, 08:18:12 PM »
This will be a car when it is finished, im not sure whether i mentioned it on this forum before but im fully aware of the whole BIVA/IVA commercial vehicle problem.
I will be adding a rear pickup bed cover, similar to that of a MR2 so essentially it will be a coupe, but look like a pickup, im doing an engine conversion anyway so there wont be enough room in the back for storage.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: 1990 Fiat 126 Pickup Conversion
« Reply #44 on: February 05, 2011, 08:47:40 PM »
I see the car is now up for sale, open to offers??