Author Topic: 126 Window winder....  (Read 1424 times)

0 Members and 1 Guest are viewing this topic.

Dave

  • Member
  • *
  • Posts: 15
  • Karma: 0
126 Window winder....
« on: August 28, 2010, 04:54:00 PM »
Hi
We've been recently rewarded with getting ourselves a beautiful little '90 126 BIS, she's a beauty but have had a few teething problems so far. One of which is the drivers window winder doesn't work, the window can be pushed up by physically lifting the glass but when driving along it'll drop with the vibrations. Can't seem to find a manual anywhere for the later models either - any help would be gratefully received?
Thanks 

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: 126 Window winder....
« Reply #1 on: August 28, 2010, 05:35:44 PM »
The window winder mechanism is covered in the Haynes 126 air cooled manual , same as the Bis. Could be a couple of things but if you pop off the door card you should be able to see what is going on. I have got a spare winder & other bits here if you find any broken bits in there. Where are you in Bucks as I am in Chesham  [-/

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: 126 Window winder....
« Reply #2 on: August 28, 2010, 09:31:28 PM »
the winder mechanism is a true nightmare if it gets unwound as it works via a metal cable that can gets kinks in it also the metal connector can rot through and become two pieces take off the door card and have a look it might just be that the cable has came off one of the guide wheels that hold it tight and retighten it.