Author Topic: Clutch Upgrade  (Read 3428 times)

0 Members and 1 Guest are viewing this topic.

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Clutch Upgrade
« on: August 08, 2010, 11:13:50 AM »
Heard it was a good idea to upgrade the clutch friction plate to a 127 sport, anyone done this ? and if so is it only the friction plate required, does the standard cove plate fit ?.

Ralph

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Clutch Upgrade
« Reply #1 on: August 08, 2010, 04:07:05 PM »
(What i heard was that a clutch from an mk1 Ibiza will fit a 126. Apparently these clutches have those torsion springs in them.)  ???
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Clutch Upgrade
« Reply #2 on: August 08, 2010, 06:38:09 PM »
Mk 1 Ibiza is a Fiat panda, so I wouldn't be surprised at all.


jokke

  • Super Member
  • ***
  • Posts: 157
  • Karma: 1
Re: Clutch Upgrade
« Reply #3 on: August 09, 2010, 03:47:13 PM »
Clutchsett for Ibiza mk1 1.2i
• Lamell 17 splines
• Diameter [mm] 190
1980 Mazda RX626
1985 Mazda RX7
1998 Fiat 126p V6

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Clutch Upgrade
« Reply #4 on: August 09, 2010, 03:59:35 PM »
Sorry I'm thinking of a Marbella

handsomery

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
Re: Clutch Upgrade
« Reply #5 on: August 18, 2010, 03:25:43 PM »
I'm sticking a new gearbox in my BIS this weekend. whilst I'm in there I should probably give it a new clutch as I've been somewhat over working this one.

does anyone know if the panda/ibiza clutch would fit, cos I'm sure they're much easier to obtain.
cheers

ciaoflyer

  • Super Member
  • ***
  • Posts: 1325
  • Karma: 3
Re: Clutch Upgrade
« Reply #6 on: August 18, 2010, 06:23:00 PM »
Sorry I'm thinking of a Marbella

I want a Marbella in bright yellow!
Ciao4Now

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Clutch Upgrade
« Reply #7 on: August 18, 2010, 07:28:37 PM »
 We had one with a 903cc engine and it was great fun. Very usable and it did over 50mpg. It wasn`t yellow tho. :oops:
1972 Fiat 500
1980 Fiat 126

smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: Clutch Upgrade
« Reply #8 on: August 29, 2010, 11:21:47 AM »


Ordered a clutch plate for a 127 in the past, the splined centre is the same but the cover plate will not fit. slightly larger in diameter, also at present I have fitted a bis clutch complete (cover and plate) in my little car and it seems to work well, and has an added bonus the pedal effort to operate the clutch is a lot less than the original air cooled one [-/

Smallcox
air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: Clutch Upgrade
« Reply #9 on: August 29, 2010, 12:09:25 PM »
I have various answers from lots of places, even a company selling a cover plate which is for a 500,126 and 127.  Some of the listing have the 127 903cc at 160 mm and others have it at 170mm.  Does the bis have the torque springs in the friction plate? Think I may go down the bis route Thanks for the info.

Ralph

smallcox

  • Super Member
  • ***
  • Posts: 433
  • Karma: 4
Re: Clutch Upgrade
« Reply #10 on: August 29, 2010, 12:14:52 PM »
Hi Ralph,

Yes the Bis plate has the springs in it and the clutch cover fits directly to the 650 flywheel with no mods required [-/

Smallcox
air cooled, gt15 garret turbo with intercooler, 14x9" wheels with 225/40/14 toyos, front arb and disc brakes

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Clutch Upgrade
« Reply #11 on: October 12, 2010, 04:47:01 PM »
 :D I just came across a complete Panda 30 clutch on eBay at the weekend . £19.99 & free delivery  [-/
Arrived today , has the same bearing , torque spring plate & I believe a higher spec cover. Worth keeping an eye out for .