Author Topic: New baby - big job ....  (Read 8803 times)

0 Members and 1 Guest are viewing this topic.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: New baby - big job ....
« Reply #15 on: August 16, 2010, 05:07:16 PM »
 :D Very impressive Darrell especially as the car appears to have been far less complete than the seller said & you had the odd dodgey panel thrown in for good measure. I did see some steel wheel adaptor plates on one of the web sites, do not go for the ally ones. Some of those bits on your list are as cheap as chips to get new parts , some will take a little more luck/cash  ;D
Keep up the good work  [-/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #16 on: August 16, 2010, 06:32:10 PM »
Thanks Stuey and Rusty, yes i guess complete is as complete gets  :oops:

The quarter light windows are going to be the fly in my ear i think, and as you say the rest is cheap as but all add-up too damn quickly!!

So far about £900 spent and guessing £600 to finnish to a complete car with and engine that runs, although, this all depends on how much fiddling with performance I end up doing as I'll be bleak with standard 499cc performance after the 126..

No doubt wifey will be watching the budget very close  :oops: I'll sneak past her somehow, I have my methods...

Will post more pics after next weekend's battle with the metal, don't think the progress will be as visible as it'll be work underneath on rear spring seats :-X, just the left wing and front end to square-up and weld on.
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: New baby - big job ....
« Reply #17 on: August 17, 2010, 09:13:51 AM »
 Hey Darrell you are doing a great progress there, especially considering how the car looked before!
 Can`t believe someone would sell this as a complete project!
 I`ll keep my eyes open for these bits.
 Keep up the good work. [-/
 Lad.
1972 Fiat 500
1980 Fiat 126

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #18 on: August 17, 2010, 03:25:36 PM »
Thanks Lad,

I think any 'slightly rusty' 500 would have needed the same amount of work and bits in reality.

I've seen a few on e bay which look complete, but when it comes down to it, most of the panels could do with replacement hence there is method in my madness, someone else cut most of the old panels off for me ;)

'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: New baby - big job ....
« Reply #19 on: August 21, 2010, 08:02:45 AM »
Hi Darrell , I made a note of your shopping list and have some bits & many comments so best to have a chat sometime  [-/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #20 on: August 21, 2010, 09:41:43 PM »
Bzzzz Bzzz Bzzzz.....grauraaaooooo.........bang bang bang......Bzzzzz Bzzzz
« Last Edit: August 21, 2010, 09:43:26 PM by Darrell »
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #21 on: August 30, 2010, 06:47:59 PM »
No more pics this weekend, just more bang bang bang bzzzz and grinding noises.

Rear inner-inner wheel arches are rubbish, took a while to get the two sets of patches off them to see what's up with them...

A patch on top of a patch....and past welding makes my welding look like a pro! :oops:

Spot welder blew-up the 240-110 transformer spectacilarly! A nice greeny-brown smoke bellowed from it leaving my good lady cursing that I 'filled her house with smoke'
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #22 on: September 03, 2010, 10:02:01 AM »
I'm away on holiday this next week :) Reports to resume when I get back [-/
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #23 on: December 17, 2010, 11:47:29 AM »
As a help to my friends and family, a list of items on e bay has been supplied to them as I have now taken to blantently hinting.

Nobody made an effort for my 40th so with pig-headedness I shall ensure no-one forgets my 41st in January!! There's xmas too!

And never being one to call in on favours, they all better know they owe me!!!!

So with a bit of luck and generosity 'Bella' will be beautiful soon :)
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: New baby - big job ....
« Reply #24 on: May 07, 2011, 09:30:13 PM »
Loads of comitments toward the end of last year left Bella under the cover till last weekend.
Car situation changed drastically with the addition of a VW Passat, company car given back and 126 no longer being used as a daily driver.
Probably better for the 126 to become a proper toy :P

Completed welding-up inner left rear wheel arch, new spring cup and jack point welded-in, all work rust treated then undersealed.

Small camera has been broken and not willing to use SLR when sparks and hammers are about so description will have to do for now.

Work to continue next weekend on right inner wheel arch etc. Will update pics when done.

Jobs still to do is weld-up and check geometry of front-end.

Tidy up panels which have been replaced, prep and then off to the painters for some of that lovely fiat creamy white  ;)
Parts missing still, quarter windows complete, front brightwork, lights, adaptor plates to fit early 126/500 wheels to 126 hubs, tyres (the ones on the car are rubbish) and a spare wheel.
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)