Author Topic: Spark plugs and plug leads  (Read 2351 times)

0 Members and 1 Guest are viewing this topic.

ciccio

  • Member
  • *
  • Posts: 15
  • Karma: 0
Spark plugs and plug leads
« on: April 08, 2010, 08:16:25 PM »
Hi Guys,

Have picked up a few bits today from local motor factors.

Upon getting them home i opened the bosch spark plugs and noticed that the thread is a lot longer than the ones i took out
Th ones removed were champion L82YC and the new ones are bosch wr6DC+.
Now have tried to cross reference thes on the interweb and no luck-can anyone post me a link to a web site so i can cross ref or shed light if the bosch ones are ok?
Cheers
PS also need leads so can anyone recommend any?

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Spark plugs and plug leads
« Reply #1 on: April 08, 2010, 10:48:19 PM »
According to the 650 Aircooled manual You have the wrong plugs in, they should be 1/2" Reach. Looks like they have given you Bis 704cc Watercooled Plugs.
Should be:
Champion L81Y. L81YC.
Diameter 14mm
Reach 1/2" (12.7mm)
Hex Size 13/16" (20.6mm)


Pete.      il cavallo piccolo

Alfons1972

  • Member
  • *
  • Posts: 62
  • Karma: 0
  • sorry for my bad english...
Re: Spark plugs and plug leads
« Reply #2 on: April 09, 2010, 10:32:29 AM »
in the german air-cooled cylinder-heads (typ: 126 A1.048: that is the one that looks similar to the Panda30-head but with only one inlet-tube) there have to be mounted the plugs with long threads...
Fiat 500 R
Fiat 500 giardiniera

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Spark plugs and plug leads
« Reply #3 on: April 09, 2010, 08:43:20 PM »
I'm interested in what the correct plugs would be as i'm going to change them as well. My 126 service manual says the following: Bosch W7BC, Champion L82YC, NGK BP6HS
The Autodata source though says: Marelli CW78NP, Autolite 283, Bosch W6DC, Champion RL82YCC and NGK BP7HS.
As you can see the Bosch,Champion and NGK types are different. Which ones are correct? I'm after Marelli plugs so which type is for the 126 aircooled engine?

Here's a link to NGK's cross reference guide. It might not be too exact though...
http://www.ngkpartfinder.co.uk/cross_reference.php?type=SPARK+PLUGS&manufact=&part=&continuetosearch=0
« Last Edit: April 09, 2010, 08:51:30 PM by GTMaster »
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Pete126

  • Administrator
  • Super Member
  • *****
  • Posts: 3369
  • Karma: 35
  • Location: West Yorkshire
Re: Spark plugs and plug leads
« Reply #4 on: April 10, 2010, 01:38:05 AM »
This is taken from the official Fiat 126 Aircooled - Owners Handbook as supplied with every U.K. new car.



Pete.      il cavallo piccolo

GTMaster

  • Super Member
  • ***
  • Posts: 809
  • Karma: 2
  • Na most a tuti- tuti- tuti
Re: Spark plugs and plug leads
« Reply #5 on: April 12, 2010, 07:56:39 PM »
Thanks for that. I'll do a bit of "mix and matching" from the lists to find the right one.
"One more drink, Lacikám?"

All about car restoration can be found in the song
"Got my mind set on you" by George Harrison...

Worm

  • Member
  • *
  • Posts: 72
  • Karma: 0
Re: Spark plugs and plug leads
« Reply #6 on: August 12, 2010, 09:28:47 AM »
I know this is an old topic but i have the same problem, in my 1983 aircooled are NGK BP6HS spark plugs, when i look around it seems NGKBP7HS are the new replacements. Links below show a comparison table and a supplier of vintage spark plugs namely the Champion L81Y.
http://www.spark-plugs.co.uk/pages/technical/champion860-n288.htm
http://www.gsparkplug.com/shop/champion-l81y.html

« Last Edit: August 12, 2010, 09:31:28 AM by Worm »