Author Topic: Metal (braided) hose - 126 bis  (Read 1682 times)

0 Members and 1 Guest are viewing this topic.

Amateb8

  • Subscribers
  • Super Member
  • ****
  • Posts: 2148
  • Karma: 8
  • Location: London
Metal (braided) hose - 126 bis
« on: March 01, 2010, 12:46:08 AM »
Hello. I noticed that a metal hose (not rubber), braided in appearance that is connected to something located just below the carburator is just hanging loosely. I think one end is connected to the external air vent whilst the other end appears to be connected to something, which is then connected to the air filter via another hose (I think?) below the carburator. I tried pushing one end back into the connector but the end felt like it was badly frayed to the point that it will not stay in place. Does anyone know what this part is called? I checked Axel Gerstl and they have hoses described as, "hose for air preheating (exhaust/below distributor)" and "hose for air preheating (exhaust/air filter)". Unfortunately, Axel's pictures are not clear, so I can not distinguish from the pictures whether it is the metal hose.

Amateb8

  • Subscribers
  • Super Member
  • ****
  • Posts: 2148
  • Karma: 8
  • Location: London
Re: Metal (braided) hose - 126 bis
« Reply #1 on: March 01, 2010, 11:40:23 PM »
I spotted this air box from ebay. The metal hose I am referrring to looks like the one on the left of the air box.

K666STW

  • Super Member
  • ***
  • Posts: 110
  • Karma: 0
  • 704cc of pure fury.
Re: Metal (braided) hose - 126 bis
« Reply #2 on: March 02, 2010, 01:00:14 AM »
I think both ends attach to a bracket on the exhaust. There's a lever on the airbox which changes the pipe it recieves it's air from. summer air that's cool and inwinter air that's prewarmed by passing past an exhaust pipe.

« Last Edit: March 02, 2010, 01:06:49 AM by K666STW »

bobblehead

  • Super Member
  • ***
  • Posts: 224
  • Karma: 1
  • monkeys on the move ..
    • my fiAT 126 PICK UP
Re: Metal (braided) hose - 126 bis
« Reply #3 on: March 02, 2010, 07:32:12 AM »
i agree thats where it goes too .. i have 2 x bis , one one doesnt have that pipe attall . and the other the pipe is split and broke .

my heater still works and i have no troubles with the car,  ..  i think its only metal / and foil like so it doesnt melt on the exhaust i reckon , goto a washing repair shop or maybe hoover shop to seek a new bit of pipe if you wish .

although if was me, id leave , just cut it off neatly

anyway thats me

laters

richard
if i have asked for help .thanks in advance for helping and giving me advice .. all the very best to you all .. respeck monkeymoves .......

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Re: Metal (braided) hose - 126 bis
« Reply #4 on: March 02, 2010, 11:06:46 AM »
as above its a heater pipe for the carb you can get new stuff from halfords etc...
one resprayed and another arrives- double trouble BIS style!!

Amateb8

  • Subscribers
  • Super Member
  • ****
  • Posts: 2148
  • Karma: 8
  • Location: London
Re: Metal (braided) hose - 126 bis
« Reply #5 on: March 05, 2010, 10:16:32 PM »
I checked Halford's website. They only sell the rubber versions. It is too close to the exhaust, so it might melt/burn. Where can I buy this metal hose?
« Last Edit: March 06, 2010, 02:30:04 PM by Amateb8 »