Author Topic: Bis and Aircooled Doors  (Read 1884 times)

0 Members and 1 Guest are viewing this topic.

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Bis and Aircooled Doors
« on: February 24, 2010, 01:14:35 PM »
What is the difference between the Bis and Aircooled doors.

On an other subject I had read that the cinq door glas would fit the 126, but check at the local scrap yard and it has the wrong angle, so the search goes on for a set from an ELX.  Anyone have a set from an ELX? May have to use plexi instead.

Ralph

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Bis and Aircooled Doors
« Reply #1 on: February 24, 2010, 01:28:22 PM »
Is the ELX type the ones with no quarter light  ???

thepuddlejumper

  • Super Member
  • ***
  • Posts: 685
  • Karma: 2
  • Location: Scotland
Re: Bis and Aircooled Doors
« Reply #2 on: February 24, 2010, 07:00:25 PM »
Dave thats what I have been told, Jan had a set but they went with a car he was selling.

Ralph

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Bis and Aircooled Doors
« Reply #3 on: February 24, 2010, 10:25:43 PM »
the doors are the same all through the 126 range however the position of rub strips and mirrors alter so the holes are in different places . for example the bis has square cut holes in the door near the base whereas the deville has just drill holes higher up the door.

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Bis and Aircooled Doors
« Reply #4 on: February 25, 2010, 06:25:21 AM »
 ;D So you can't fit a square holed door into round holed wing mirror , is that what you are saying ?  </4 </4 </4

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Bis and Aircooled Doors
« Reply #5 on: February 25, 2010, 09:27:12 PM »
anyhow doors are so tedious as you must open them to enter and exit why not just have chains like fairground rides.....