126 Bits & Bobs

[Rusty's Uncle]

  Over the years , apart from owning & running a number of 126s , I have also dismantled a couple of write off cars. I never throw anything away unless it is scrap & many popular parts have been sold either through want ads on this forum or eBay. I have lost track of the countries I have shipped to but they include the US & Oz. I have a part dismantled air cooled in my garage which is due for it's final strip down in the near future. a few bits are spoken for already plus I will be keeping parts that will fit my Fiat 500. Despite this there should be some parts up for grabs. So no part is too small or too large , just let me know if you need anything  [-/

[kartman]

I may need a starter motor for an aircooled?........Martin

[Amateb8]

Hello. Have you got used rear trailing arms in good condition for a 126? I also need that part behind the drums attached to the rear trailing arms.

[doglog]

Have you got any chrome trim bits? (Windscreen and side window trim, door handles, bonnet lock, wiper arms etc.)

[Rusty's Uncle]

No spare starter motors at the moment in fact I bought spare 500 & a 126 cable pull types on eBay as back up spares . Also you can buy new all of the parts you need to overhaul a knackered one so with a little forward planning they are no problem.
I am not sure , until I get them off , what the condition of the rear suspension arms & I assume you are referring to the brake backing plates are but you can get a brand new pair of each for about 100 euros + carriage which I guess would be better than getting a rusty old set and paying to have them blasted & powder coated.
Some ones' got a thing for bling then  when you say chrome door handles are you talking about the outer ones that have the stainless centre handle ?
Side window trim is alluminium unless you are talking about quarterlights on some cars and do you mean engine cover lock ?
Looking for wiper  parts , may have some stainless ones  [-/

[Amateb8]

Yes, it is the brake backing plate I was referring to. My other 126's brake backing plates on the front and rear are knackered. I did not know you could still buy them, thought the plated were welded to the trailing/control arms. Many thanks. I would have been lost without the help of forum members like yourself. Many thanks again.

Checked out Axel Gerstl. It brake backing plates are Euro39 each excl pp.

[doglog]

Yes, I mean the outer stainless door handles, engine cover lock and aluminium window trim.

[Rusty's Uncle]

I have found a pair of stainless wipers & arms that look ok. I have some ally window surounds & the door handles. If you PM me with an e-mail address I can send pics.
www.126fan are listing brake backing plates for 11 euros and rear suspension arms for 39.5 euros.  [-/

[Rusty's Uncle]

 </1 With a bit of help from Michael we extracted the 126 scrapper from my garage so I now have access to a few more parts  [-/

[Amateb8]

Hello. It might be useful to list all the bits and bits you have for sale. I may want to buy some items as spares.

[Rusty's Uncle]

Sadly as a long time car nut / enthusiast if I started to make a list of parts that I have I would probably get it sorted in about a year , if I had no distractions 
Then if an item sold the list would be out of date 
My list would include generic classic motor parts like Lucas etc, pre war Talbot , Sunbeam Talbot , Hillman parts . Later Austin Healey , MG , Morris & Austin then I could start on the Fiat 500 & 126 list.
Do not worry because I have been asked for lists so many times for different car makes over the years but as an enthusiast as opposed to a computer controlled motor factors it just ain't possible but if you have busted that little clip that is behind that special grommet then I might just have it 

[Rusty's Uncle]

  Still some bits left  [-/

[bobblehead]

hi mate, what are the bottom of the arches like on the rear of car please? can you take a pic for me.

or has your angle grinder mate cut them off ?

let me know please


if they were suitable would you take a grinder to the bits i wanted please?

and post them, as your far away from me

[gsxr126]

Hey Dave,

Need a GC gearbox if you have one.

Cheers
Dan.

[Darrell]

Hi Dave,

What you after for the rear windows?