I would sit comfotably between 70 and 80 in my bis, even saw 85/90 at times. Just run it up to temperature before and make sure the cooling system is good, fresh oil and a filter clean out, all should be good [-/
If it seems sweet at 60 then cool
My theory is they need to run fairly close to full power every so often or they coke-up and become less powerful.
They don't rev that high... my yamaha 600 revs to about 13000rpm or something..yes I know new technology etc etc but it runs like a pig when it has to do alot of 'comuting', after a track day I feel it runs so sweet.
Last time I heard fiats break from over heating, broken gear boxes, and all sorts of stuff, never heard of one breaking due to being over-reved..
The air cooled however is a slightly different beast in that I'd agree with the boys who say sit at 60.
There is just something about the air cooled that doesn't like 70.. seems to use way more fuel. They tend to breathe alot more through the engine breather...I dunno, we'll see, I'm about to put a delorto on it and a oil catch breather system. Breather on the crankcase too.
I have a theory! Two pistons, flying up and down at the same time, must be some air movement either way, thus a connecting pipe between the top breather and a crank breather might equalise this a little...then off to the catch thing...spanners and time will tell.
I have found a tame engineering company who have agreed to look at my cylinder head and 'port' it, unleaded seats, bigger valves, getting rid of the 'elbows' on the exhaust system as I have made some up which are wider diameter and smoother.
Who knows, somw 'improvements' have gone on in the past and come off as quickly.
My air cooled has seen 85

Engine bay was alot oily-er afterwards
