Author Topic: fitting a FIRE into a 500  (Read 4523 times)

0 Members and 1 Guest are viewing this topic.

The Doctor

  • Member
  • *
  • Posts: 51
  • Karma: 0
fitting a FIRE into a 500
« on: November 10, 2005, 09:07:42 PM »
trying to help a nice guy called Nigel in UK, who needs info;  he has a seciento 1108 MPI fire engine to go in his 500.  he has a 126 gearbox, and the 126 engine has a bronze spigot shaft bearing in the end of the crank to support the spigot shaft.  the fire engine does not have this bearing, so how is the spigot shaft su[pported?  We are trying Polish sites but their info is a bit obtrusive. Thanks for any good info.
you can do it in a 126 (I have!)

fiatfsm

  • Super Member
  • ***
  • Posts: 675
  • Karma: 2
fitting a FIRE into a 500
« Reply #1 on: November 10, 2005, 11:13:55 PM »
the 1108 Fire engine will kill a 126 gearbox eventually!
1987 Fiat 126 FSM, alloys, clear lights, Polish tat accessories... love it!

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
fitting a FIRE into a 500
« Reply #2 on: November 11, 2005, 03:37:24 PM »
Nigel, has a 1960's 500 gianini replica!! he comes on here quite a bit. his user name is "hudson henry" I gave him your email Graham as he was having loads of problems communicating with people he said, in poland.

I went round his house last saturday! he lives about 5 mins from me, he took me out in it!! it has a 650 at present can do 85 on motorway he said, and blimey was it nippy!!! i will post a pic of it up in a sec.

As for the 126 gearbox problem, he is fitting a seicento gear box!!

regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

hudsonhenry

  • Super Member
  • ***
  • Posts: 303
  • Karma: 1
    • http://www.retro500.com
fitting a FIRE into a 500
« Reply #3 on: November 11, 2005, 04:47:57 PM »
Graham

Thanks for posting thiis up on the forum for me, I really appreciate the effort that you are making to help me with this conversion, there is a forum in Poland that might yeild some information:

http://motonews.pl/sh_forum.php?op=fvf&f=25

it would be fantastic if I could find someone who has done this conversion on a 126 and is willing to share their knowledge and would save lots of work if there is someone who could cast up an adaptor plate for me. :D

I am planning to use the 126 box that is fitted in the car at the moment, I want to see how long it lasts with the extra power of the tuned 1108 engine (distruction testing :twisted: )  I plan to add a fith gear when funds allow and may revert to the non-sycro box from the 500 if the 126 box proves to be too weak, if I hit it lucky on the lotto then I would stick a six speed sequential conversin on like some of the minicar racers in Italy do on their 500's

Chris, you are welcome to pick up the seats any time and we can sort everything else out when I have sorted the subframes for you.

Nigel
http://www.retro500.com the site dedicated to modified Fiat 500's

Chris Lakin

  • Super Member
  • ***
  • Posts: 2105
  • Karma: 0
    • http://www.fiat126.co.uk
fitting a FIRE into a 500
« Reply #4 on: November 11, 2005, 06:24:28 PM »
speak of the devil!!  :twisted:

Hi Nigel,  im pleased your making progress!! had any more thought about dumping your tuned 650 into an aircooled 126?? (when you sort the 500 with the new engine)

is there a specific time you want me to collect seats or shall i drop by on the off chance? What do you think to your new seats?? pleased?

I have a few ideas for upolstery, had a look on ebay for that material, couldnt find it, but not a probelm, also did you see that racing steering wheel on ebay?? last time i looked was 50 odd quid!!!




regards

Chris
+ SKYPE USERNAME: fiat126.co.uk
+ CLUB (ENQUIRIES): [email protected]

hudsonhenry

  • Super Member
  • ***
  • Posts: 303
  • Karma: 1
    • http://www.retro500.com
fitting a FIRE into a 500
« Reply #5 on: November 12, 2005, 08:33:28 AM »
Chris

I will pm my mobile number, the company i was talking about have an ebay shop

http://stores.ebay.co.uk/interior-trim-supplies_W0QQssPageNameZviQ3asibQ3astoreviewQQtZkm

or web site

http://www.martrim.co.uk

The material i suggested was Alcantara which is £25.00 a meter in the special offers section of their site or £29.37 on their ebay shop – cheaper to go via their web site.


They do lots of different stuff  from cheap and chearfull through to top quality leather hides.
http://www.retro500.com the site dedicated to modified Fiat 500's

The Doctor

  • Member
  • *
  • Posts: 51
  • Karma: 0
fitting a FIRE into a 500
« Reply #6 on: November 13, 2005, 09:22:58 PM »
:D Hi Nigel, what a superb car :!:
Looked at the polish site on your last post, and the english section has quite a lot about fitting the engine to  a 126 box - mostly about that plate.  take a look, as the main suggestion is the same box from the engine, ie seceicento.  still trying to contact the plate maker. on thursday I am going over into Poland for winter tyres, so I'll see what I can do there.
cheers
Graham
you can do it in a 126 (I have!)