Author Topic: Thermostat housing location  (Read 2106 times)

0 Members and 1 Guest are viewing this topic.

126freddie

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Thermostat housing location
« on: October 25, 2009, 10:25:06 PM »
HI all my name is Garry and I have just bought my first 126 bis. I have been reading through the posts but have not found information on where the thermostat is located, could anyone give me some advise on the exact location. I have only had it running round our yard and havn't had any issues yet, temp gauge goes 1/3rd up and heater is nice and hot but it had stood for 3 years and was going to change it as a precaution as I have heard over heating can be an issue.

Thanks in advance.

Alex

  • Member
  • *
  • Posts: 96
  • Karma: 2
Re: Thermostat housing location
« Reply #1 on: October 26, 2009, 09:38:15 AM »
Hi Freddie

the Thermostat is located on the bottom left hand side of the engine, the general rule of thumb is to completely replace the thermostat as they generally sieze up if left standing.

hope this helps
Alex

126freddie

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: Thermostat housing location
« Reply #2 on: October 26, 2009, 09:22:16 PM »
Cheers for that, I had a feeling it was there but I always thought that the stat would be on the top hose nearest the cylinder head. So am I right in saying the water has to go through the top hose then through the rad some how (if the stat is closed) before getting to the stat, or does it flow the other way round so that the stat is first in line  ::).
Thanks in advance, Garry.