Author Topic: niki 650 newbie questions  (Read 6000 times)

0 Members and 1 Guest are viewing this topic.

sideways

  • Newbie
  • *
  • Posts: 13
  • Karma: 0
niki 650 newbie questions
« on: May 16, 2009, 01:55:34 PM »
im searching for a fiat 126(or a niki 650 as i live in australia) and i was just wandering is there anything that spells stay away? anything that i should look out for?

thanks in advance

Hayden

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: niki 650 newbie questions
« Reply #1 on: May 17, 2009, 08:39:04 PM »
yes F.I.A.T....... welcome to the forum.

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: niki 650 newbie questions
« Reply #2 on: May 18, 2009, 10:01:25 AM »
Being that you live in Austalia I don't think rust would really be a problem ;O)  You can't really listen out for tell tale ticking or knocking as that is what they sound like normally. Basically all you need to do is see if it drives and stops, if it does that then that's about as good as it gets.  Put it this way if you drive down the road and it goes bang then you can usually replace the parts for less than the cost of a service on a new car and if you don't want to do that then you can sell it on as parts and make a tidy profit.  [-/

sideways

  • Newbie
  • *
  • Posts: 13
  • Karma: 0
Re: niki 650 newbie questions
« Reply #3 on: May 19, 2009, 01:24:28 PM »
thanks guys!i know that repairs will be cheap but my main concern is the availability of parts because(belive it or not)these cars are super rare in australia

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
Re: niki 650 newbie questions
« Reply #4 on: May 31, 2009, 03:50:30 AM »
Hey,
Glad to see another enthusiast in AU.
I've got a white Niki for sale, but I'm in SA. I also have a decent collection of spares, though I'm starting to run low now.
Dont worry about parts, If you get yourself into your local fiat 500 community (most of them welcome nikis) there should be plenty of people there to help you find parts, many fiat 500's have been converted to niki motors, aswel as those people who already have nikis.
Welcome to the forum!
--
phreak97

sideways

  • Newbie
  • *
  • Posts: 13
  • Karma: 0
Re: niki 650 newbie questions
« Reply #5 on: June 19, 2009, 04:03:07 PM »
hey sorry mate, havnt checked this forum for ages, thanks for the info mate, i hope i can find a 126 that a can afford soon! iv seen several for $1500+ which is just ridiclous i think lol

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
Re: niki 650 newbie questions
« Reply #6 on: June 20, 2009, 09:56:48 AM »
Not as rediculous as you think! theyre getting very hard to come by and even harder in good condition. I bought one for $800 which has some problems to fix before I sell it, but I'll be asking $2000 for that once it's on the road. It's in very good nick though.

It just depends what you want to start with.. I actually got one for free which I decided was too far rusted to bother with and stripped it for parts.. but it was registerable if i'd wanted to drive it as a bucket of rust with a flattened right side (it'd been tipped over)
--
phreak97

lamestllama

  • Member
  • *
  • Posts: 16
  • Karma: 0
Re: niki 650 newbie questions
« Reply #7 on: August 20, 2009, 03:24:59 PM »
Hi

I sent you a message by facebook. I am in Adelaide and very keen to buy a FSM niki. Do you still have one for sale ?

Regards

Eric

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
Re: niki 650 newbie questions
« Reply #8 on: August 20, 2009, 10:55:42 PM »
I replied too!

You just missed out on mine and another one I knew of too, I've got a body in my backyard if you want a project. probably wouldnt be too much work to get going, parts would be the only issue.
otherwise I can ask around if you like? theres one parked in wayville all the time, maybe the owner of that might want to sell it? otherwise I know someone out the other side of the city who had one for sale a while ago, but I havent talked to him in ages so I dont know if he still has it.

james
--
phreak97

roobeh

  • Super Member
  • ***
  • Posts: 183
  • Karma: 3
Re: niki 650 newbie questions
« Reply #9 on: August 21, 2009, 03:12:07 PM »
how's about this'n? looks decent enough to me.

http://cars2.ebay.com.au/FIAT-NIKI-650_W0QQcmdZViewItemQQitemZ220467834008

also i noticed all niki's have bis side vent's. anyone know why?

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
Re: niki 650 newbie questions
« Reply #10 on: August 21, 2009, 03:22:52 PM »
how's about this'n? looks decent enough to me.

http://cars2.ebay.com.au/FIAT-NIKI-650_W0QQcmdZViewItemQQitemZ220467834008

also i noticed all niki's have bis side vent's. anyone know why?

yeah looks ok, but you've gotta remember it's a few thousand kms from one side of AU to the other, and that one's not close to adelaide:P (3000kms)

I didnt realise they were bis vents, I just knew they were different. I guess they have those cos it gets bloody hot here and theyre a bit bigger. are they interchageable with the other vents? I'd like to make mine look like a proper 126p
--
phreak97

landyman

  • Super Member
  • ***
  • Posts: 127
  • Karma: 2
Re: niki 650 newbie questions
« Reply #11 on: August 21, 2009, 08:32:36 PM »
my polish 650 has same vents circa 1990

roobeh

  • Super Member
  • ***
  • Posts: 183
  • Karma: 3
Re: niki 650 newbie questions
« Reply #12 on: August 21, 2009, 08:44:55 PM »
yeah looks ok, but you've gotta remember it's a few thousand kms from one side of AU to the other, and that one's not close to adelaide:P (3000kms)

I didnt realise they were bis vents, I just knew they were different. I guess they have those cos it gets bloody hot here and theyre a bit bigger. are they interchageable with the other vents? I'd like to make mine look like a proper 126p

yeah, i'm no expert in australian geography.. the only thing i know about adelaide is it's where the hilltop hoods come from. ( i guess most wont know what i'm on about. )

and i don't think the vents are interchangeable aircooled ones are smaller and higher up..

sideways

  • Newbie
  • *
  • Posts: 13
  • Karma: 0
Re: niki 650 newbie questions
« Reply #13 on: August 22, 2009, 04:38:27 PM »
why is it that when i didnt have the money to get a niki(i have three cars allready so yeah lol) there were registered one going for $200-$400 and now that i have the $$$$ i havnt been able to find a registered one for under $2000???? and the only unregoed one ive seen was $800(its the one thats on ebay, exept its an ad in a classifieds newspaper)  :cry:  :cry:  :cry:  :cry:

lamestllama

  • Member
  • *
  • Posts: 16
  • Karma: 0
Re: niki 650 newbie questions
« Reply #14 on: August 23, 2009, 04:39:05 PM »
Looks like the one in WA went for $900 I was considering it but getting it from WA is a long drive. Like you guys in the UK getting one from Italy.

Hey Sideways did you buy the one on ebay in WA ?

Now there is another in Queensland which is 2000k away from me in SA. :(

It seems I have missed 4 or so in the last month in Adelaide. I should have started looking earlier.

What I would really like to know is how many were imported into Australia. And how many were red and how many white. This is the sort of stuff you expect to find on the web but as yet I haven't.