Author Topic: How to find out about PCD on alloy wheels???  (Read 6937 times)

0 Members and 1 Guest are viewing this topic.

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
How to find out about PCD on alloy wheels???
« on: March 27, 2009, 07:40:32 AM »
 I`m selling some alloy wheels on eBay for my neighbour, but I`m not sure what PCD they are. They are either 4x98 or 4x100, but is hard to tel the 2mm difference. Is there a web site to find out?  They are OZ(01326220).
 Any help appreciated.
1972 Fiat 500
1980 Fiat 126

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: How to find out about PCD on alloy wheels???
« Reply #1 on: March 27, 2009, 08:55:02 AM »
Chances are that the wheels will have been available in various PCD so Make/Model won't be a lot of use :(

There are tools that you can buy to check. Something lke this, if you can find it in the UK
http://cgi.ebay.com/ebaymotors/4-Lug-SAE-and-Metric-Wheel-Bolt-Pattern-Tool-One_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177QQhashZitem220255519128QQitemZ220255519128QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I just did a quick search on e-bay


1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: How to find out about PCD on alloy wheels???
« Reply #3 on: March 27, 2009, 10:42:26 AM »
 Ordered it just in case. Could be helpful in the future. Hope it will do the job.
 Thanks [-/
1972 Fiat 500
1980 Fiat 126

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Re: How to find out about PCD on alloy wheels???
« Reply #4 on: March 27, 2009, 07:32:09 PM »
easypcd.co.uk mark makes em and they is noice!-

one resprayed and another arrives- double trouble BIS style!!

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: How to find out about PCD on alloy wheels???
« Reply #5 on: March 27, 2009, 08:21:14 PM »
 ;) I was just about to reply when my son came round to nick my car for the weekend. Asked him if he wanted any food before he went off to see Peterbrough give those crisp eaters a thrashing in the morrow. No he said , my lady just made me some venison burgers. Bet they were deer I said  ;D  Bit like that bit of plastic  </4 Sorry but I cannot imagine anyone owning up to owning one as I think you can get a Tesco "back to school" ruler for about 10p. Now that the mystery of NOS has been solved then I can tell you non-tech guys that do not know that PCD stands for pitch circle diameter which means the diameter of the circle upon which the holes have been drilled. So on four stud wheels all you have to do is measure across two opposite holes or sides of to get an accurate reading

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: How to find out about PCD on alloy wheels???
« Reply #6 on: March 27, 2009, 10:18:11 PM »
 Well in this case PCD stands for Plastic Came Dear... :oops:
1972 Fiat 500
1980 Fiat 126

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Re: How to find out about PCD on alloy wheels???
« Reply #7 on: March 28, 2009, 12:28:15 AM »
lol I take it you dont want one then... ;D
one resprayed and another arrives- double trouble BIS style!!

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: How to find out about PCD on alloy wheels???
« Reply #8 on: March 28, 2009, 04:49:52 PM »
;) I was just about to reply when my son came round to nick my car for the weekend. Asked him if he wanted any food before he went off to see Peterbrough give those crisp eaters a thrashing in the morrow. No he said , my lady just made me some venison burgers. Bet they were deer I said  ;D  Bit like that bit of plastic  </4 Sorry but I cannot imagine anyone owning up to owning one as I think you can get a Tesco "back to school" ruler for about 10p. Now that the mystery of NOS has been solved then I can tell you non-tech guys that do not know that PCD stands for pitch circle diameter which means the diameter of the circle upon which the holes have been drilled. So on four stud wheels all you have to do is measure across two opposite holes or sides of to get an accurate reading

cool mate, just wondering, do you measure the inner end of the screw hole, the middle point or the outer end?
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: How to find out about PCD on alloy wheels???
« Reply #9 on: March 28, 2009, 06:17:39 PM »
£4.50 Blimey what a rip off.

Just bought one from Ebay, so many cheap alloys at boot sales where the owner has no idea what they fit.....