Author Topic: Catastrophic failier! ??  (Read 4830 times)

0 Members and 1 Guest are viewing this topic.

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Catastrophic failier! ??
« on: March 01, 2009, 06:39:08 PM »
 :o Ok guys try and beat this one ( I'm sure you will ) Back in 1991 whilst following the radio 1 roadshow in my 1978 126 just as I headed over Bodmin moor there was no warning, just a clatter clatter BANG!  Obviously I stopped, walking round the back I dicovered an oil slik and loads of metal all over the road The AA were only a couple of miles away and they gave me a Vauxhall Nova GSI to drive home in laughing about how they should remove 2 of the spark plugs to make me feel at home, talking of which I ended up getting home quicker than I would have if I hadn't broken down!  The thing would wheelspin through 1st 2nd and 3rd gear.

Anyway back to the point, conrod on the 126 disintigrated and piston shot down to break the crank and shoot through the sump.  >:(

Beat That!  :P

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Catastrophic failier! ??
« Reply #1 on: March 01, 2009, 06:54:43 PM »
Not personal as I've only been driving a short while, nor is it 126 related, but my mum bought a Renault Laguna (N reg) about 6 years ago. Within 3 months of buying it (from a dealer I might add) she was driving along the high street in Forres when *CLUNK* the gearbox fell out   :yikes:

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Catastrophic failier! ??
« Reply #2 on: March 01, 2009, 07:05:31 PM »
Nah! you only get 1 out of 10 for that one, firstly its not a 126 and secondly it's french, what do you expect.  My first car was a 1976 renault 5 and I'm not kiddin' the back wheels actually fell off at about 55 mph when I hit a bump!  full of rust totally useless.

C'mon!  try again LOL  ;D

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Catastrophic failier! ??
« Reply #3 on: March 01, 2009, 07:29:04 PM »
Markie, you seem to be the only one "blessed" with a exploded engine  :D :D :oops: lol...
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Catastrophic failier! ??
« Reply #4 on: March 01, 2009, 07:30:16 PM »
C'mon!  someone's gotta have a better story!  :P

Rusty's Uncle

  • Subscriber VIP+
  • Super Member
  • *****
  • Posts: 2837
  • Karma: 34
Re: Catastrophic failure! ??
« Reply #5 on: March 01, 2009, 07:38:35 PM »
 </8 Must be a Renault thing. I think there was a time when they tried to combine car body manufacture with origami. I bought a Renault 14 for a song some years ago. Sorted the pistion rings & it sailed through the MOT. A week later I lifted the bonnet for some reason and the car seemed to sink an inch or two for some reason. Closer inspection showed that the suspension struts were rusted away and being held down by the closed bonnet. I showed the guy next door and he offered to tow me to the local scrap yard. No way I said not with a years MOT. Out came the trusty pop rivet gun , heavy duty rivets and the sheet metal from an old washing machine & it was "On the Road Again" (Canned Heat  ;)). About a year later while out on a run there was something loose in the boot. Pulled over & there was , the shock absorbers  :oops:
Finaly put the beast to rest :(

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Catastrophic failier! ??
« Reply #6 on: March 01, 2009, 07:58:44 PM »
Lol, those old renaults /not the new ones, the new ones are mostly plastic  :D / seam to be reall rust buckets. a friend of mine had a renault 5 turbo, a real beast of a car, and one day he had a flat tire, well no problem, took the jack out and started jacking the car up... after a while we noticed that the car wasnt getting any higher... upon closer inspection we found out that the jack gone straight thru the rusty tinwork and into the interiour... and that was the TURBO, the best 5 they ever made... wonder what the cheap 5 were like...  :oops: :oops:
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Catastrophic failier! ??
« Reply #7 on: March 01, 2009, 08:06:39 PM »
 >:( Elleaux I am French! why do you think I speak with this outragious accent? you are sons of a silly person! I fart in your general direction. Your mother was a hamster and your father smelt of elderberries!

Bring me a shrubbery, and Italian one! not too large. or we shall say Ne!

C'mon some of our Polish pals must have some fantastic 126 stories, we all know they are mad! LOL  ;D

stuey

  • Subscribers
  • Super Member
  • ****
  • Posts: 1409
  • Karma: 14
  • Location: kings lynn
Re: Catastrophic failier! ??
« Reply #8 on: March 01, 2009, 08:21:44 PM »
I havent got the picture any more but I did have one of a 126 engine with the exhaust valve embedded into the piston... ironically the engine still ran!
one resprayed and another arrives- double trouble BIS style!!

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Catastrophic failier! ??
« Reply #9 on: March 01, 2009, 08:32:50 PM »
LOL! now that's more like it! 5 1/2 out of 10 for that one plus another 1/2 for the fact that it still ran  ;D

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Catastrophic failier! ??
« Reply #10 on: March 01, 2009, 09:44:30 PM »
Alfa 155, only had it a week and managed to seize the engine completly, the repair cost more than the car. In fact it was being repaired more than driven. Would I have it back 100% yes.
Loved it to bits when it worked.

126 disasters. My 126 in poland having a Skoda 120 engine fitted, won't bloody fit all in bits in the back of a friends garage, Good idea but was not to be.

Another recent disaster, Friend bought a Merc and his wife topped up the water for him as was low on antifreeze, The blond Essex girl mixed up where the water and oil go, but she said it took a lot of water before coming out the top :oops: Her hubby laughed so much...... they are no longer together I wonder why.

1973/126

  • Super Member
  • ***
  • Posts: 1753
  • Karma: 23
  • Location: Tunbridge Wells
Re: Catastrophic failure! ??
« Reply #11 on: March 02, 2009, 11:54:25 AM »
 O.K. so it is not Italian, but I give it a shot. Back in the days I used to have a Skoda 105-Estelle. The steering column disconnected while doing about 60mph. Luckily it was on a straight bit of road. Another time the rear wheel came of(not unusual on the old Skodas) doing about the same speed. Ended lucky again, but it took us an hour to find the wheel :) On my Skoda 110R the whole rear suspension arm broke of while driving along(all that hanging the back end out took it`s toll) The Italians have been pretty good with no major disasters...
 Also there was a car we bought on eBay recently without viewing. Spoke to the guy before, and seemed nice. Anyway went up to Birmingham on a coach and took a train from there. Picked up the car, all good. Asked the guy if the water and oil is all good, or if I need to check it. He  said everything is O.K. Set of to London. Was an older car, but was coping really well, apart from the heater not working. On the M25 our journey came to an end. The water temperature light came on(no gauge), and the car just died on the roundabout. Really bad burning smell. Couldn`t start it again. Had to wait an hour for the recovery truck in freezing cold on the hard shoulder(temperature was below 0). Got home about 1am. Checked the car next day almost no oil and water. Never got round fixing it, so sold it on. Hope I will meet the guy again who sold us the car... [-/
1972 Fiat 500
1980 Fiat 126

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Catastrophic failier! ??
« Reply #12 on: March 02, 2009, 08:52:07 PM »
I had a Honda CB400T Hawk motorbike.

Was a good bike, cheap etc.

On the way home the back wheel locked-up in a corner - threw me off - stopped abruptly against a concrete barrier. It was sore..

Anyhow I limped accross to the bike and pushed it off the road.

A few days later saw a hole in the casing, so stripped it.

The following was found.

Bent valves
Hole in piston
Twisted conrod
Snapped camchain
Piston skirt opened-up and barrel cracked-open
Balencer chain broken

The list went on but I suspected the camchain broke and it must have taken a revolution or two for the camchain to bunch-up under the one piston, when this came down it twisted and broke open the base of the piston pushing some of the chain through the casing.

Luckily I found another engine  [-/
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Catastrophic failier! ??
« Reply #13 on: March 02, 2009, 09:28:48 PM »
should have just pushed the clutch...  :D LOL :D
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

Darrell

  • Super Member
  • ***
  • Posts: 1715
  • Karma: 4
    • facebook profile
Re: Catastrophic failier! ??
« Reply #14 on: March 02, 2009, 09:30:54 PM »
happened so quick there wasn't time to do anything :oops:
'84 aircooled 126 & 500F still in kit form
Not the only African in the village :)