Author Topic: Fuel pipe bore size?  (Read 3674 times)

0 Members and 1 Guest are viewing this topic.

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Fuel pipe bore size?
« on: February 07, 2009, 08:43:24 PM »
Hi Guys so haw many of you have been out doin donuts in the snow??  LOL  Anyway what I want to know coz I can't be bothered to check is does anyone know the correct bore size of the fuel pipe?  6mm?  8mm?  Let me know and don't start arguing with each other!

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Fuel pipe bore size?
« Reply #1 on: February 08, 2009, 05:39:53 AM »
8mm, no arguing  :oops: :D
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
Re: Fuel pipe bore size?
« Reply #2 on: February 08, 2009, 09:04:28 AM »
Not arguing but :-

I fitted 6mm braided It is a tight fit but goes on. I found 8mm a bit loose and would have needed very tight clamps. (I am talking AC not WC though)

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Fuel pipe bore size?
« Reply #3 on: February 08, 2009, 03:38:50 PM »
then 7mm would be perfect :P
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Fuel pipe bore size?
« Reply #4 on: February 08, 2009, 03:57:03 PM »
Cheers guys!  That's made things a lot clearer...   Not!  LOL
I told you no arguing!

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Fuel pipe bore size?
« Reply #5 on: February 08, 2009, 04:12:39 PM »
I can settle this now!  It's 6mm, I just measured one of my inline fuel filers which I fitted without without clamps a perfect fit and 6mm Ok guys!

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Fuel pipe bore size?
« Reply #6 on: February 08, 2009, 04:28:41 PM »
i know i have 8mm on my bis. so the airc. must be different...
sorry we couldnt be of more help, but its like that, and thats the way it is  :oops: :D :D
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Fuel pipe bore size?
« Reply #7 on: February 08, 2009, 05:08:46 PM »
The Outhere Brothers!  Kewl Blast from the past! LOL ok I'll test you! "thats just the way it is" "some things'll never change"  ;D

Eklipze3k

  • Super Member
  • ***
  • Posts: 632
  • Karma: 2
Re: Fuel pipe bore size?
« Reply #8 on: February 08, 2009, 05:44:33 PM »
That'd be Run DMC Mark, but I'm sure Gordan will let you off ;)

subvert73

  • Super Member
  • ***
  • Posts: 138
  • Karma: 1
Re: Fuel pipe bore size?
« Reply #9 on: February 08, 2009, 05:59:02 PM »
Isn't it Bruce Hornsby?
Steve.

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Fuel pipe bore size?
« Reply #10 on: February 08, 2009, 06:08:53 PM »
Yes, im quite sure that was the RUN DMC  [-/
man, we really know how to off topic on this forum dont we?? luckily the mods arent as strict about it as on some other forums i know  :oops: [-/ [-/ [-/ [-/
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Fuel pipe bore size?
« Reply #11 on: February 08, 2009, 06:18:51 PM »
I stand corrected Run DMC V Jason Nevins A sweet tune to play on your incar sound system Fitted to your 126!  Are we getting back to Topic now?

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
Re: Fuel pipe bore size?
« Reply #12 on: February 08, 2009, 07:04:36 PM »
Are we getting back to Topic now?

well, if we gotta...  :oops:
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

bis13

  • Super Member
  • ***
  • Posts: 2749
  • Karma: 39
Re: Fuel pipe bore size?
« Reply #13 on: February 08, 2009, 07:36:32 PM »
talkin about pipes i find a mid length mahogany with bone mouthpiece is a must for the finer of the ready rubbed tobacco thats available nowdays what?

markie

  • Super Member
  • ***
  • Posts: 114
  • Karma: 2
  • 1982 original bodywork no rust no welding
Re: Fuel pipe bore size?
« Reply #14 on: February 08, 2009, 08:01:11 PM »
I prefer Rough Shag but that's another topic, nothing to do with the 126 unless you have mirrored windows and are very very small!??

Visit http://www.smokersforums.co.uk/
for more info

Other good websites are available.