Author Topic: bis to air cooler  (Read 1507 times)

0 Members and 1 Guest are viewing this topic.

jon.hunt

  • Member
  • *
  • Posts: 89
  • Karma: 0
bis to air cooler
« on: November 08, 2008, 10:06:28 AM »
Hi

    Anyone know is it an easy conversion to put a Air Cooled engine and gearbox into a Bis Car Please.

                                                Jon.

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
bis to air cooler
« Reply #1 on: November 08, 2008, 10:16:11 AM »
I dont even think its possible, the bis engine is much smaller, horizontall, while the aircooled is larger, verticall...
I could be wrong...
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

phreak97

  • Super Member
  • ***
  • Posts: 576
  • Karma: 2
  • Niki!
bis to air cooler
« Reply #2 on: November 08, 2008, 12:20:56 PM »
you might be able to put a bis engine into an aircooled with minor modification, but an aircooled engine would have to come up through the floor of the back area of a bis (you'd have to cut it) as the engine bay is much smaller vertically, you'd be making an awful mess of the car for no reason.
--
phreak97

Gadge

  • Subscribers
  • Super Member
  • ****
  • Posts: 1353
  • Karma: 15
  • Location: Warwickshire
bis to air cooler
« Reply #3 on: November 09, 2008, 12:46:07 PM »
beleve it or not but many years ago i was trawling through ebay and came across a bis that for some reason had an air cooler fitted. size wise it did fit in but only when the engine compartment lid was removed as it was too tall. also the fan shroud had to be cut to fit. it looked a complete mess and i imagined that it would be noisey as the engine would be in the car with you. also you would lose any benifits of the tailgate and flat floor. not a good idea however i wonder if it would work the other way round?.....
FOR LACK OF A BETTER NAME

GET SOCIALBLE.  Instagram me on _gadge_ ;D

michaelodonnell500

  • Super Member
  • ***
  • Posts: 758
  • Karma: 7
bis to air cooler
« Reply #4 on: November 10, 2008, 09:35:46 PM »
It would work the other way round.
It's alot easier to lay some pipe-work and fit a radiator than it is to make a successful air intake to suit an aircooled engine.
Rust does not discriminate