Author Topic: Punto Alloys - will they fit? (Read 3043 times)

finlay · « **on:** March 22, 2008, 03:52:12 PM »

Will Punto 13" rims just bolt straight on?

What about Cinq/Sicento alloys?

claire · « **Reply #1 on:** March 22, 2008, 05:25:27 PM »

I currently have sei alloys on mine. They just bolted straight on no problems :cool:

stuey · « **Reply #2 on:** March 22, 2008, 05:38:16 PM »

all (awaits correction...most) fiat wheels are 4x98 bolt pattern and 13" rims usually fiat 126's ok do you know what width they are?

finlay · « **Reply #3 on:** March 23, 2008, 10:24:53 AM »

Yes they are pretty standard 5.5J width from a 97 Punto. Problem is they are not local else I would have simply tried them on the car!

Also what size rubber do you suggest 165/70?

stuey · « **Reply #4 on:** March 23, 2008, 10:35:12 AM »

many schools on this I have 185/50/13's on mine but i think that most do go with 165/70's....

bis13 · « **Reply #5 on:** March 24, 2008, 01:42:39 PM »

try 165 55 r 13 pirrelli do them and nankang do also but have very square profile.

Bruce · « **Reply #6 on:** March 26, 2008, 10:10:42 PM »

this is mine with 165/55 nankings on cinq wheels

these are as near as damn it the same diameter as the originals so the gearing and speedo are almost spot on.

Tomasz · « **Reply #7 on:** March 27, 2008, 04:24:10 PM »

if i do get those 13 5.5j wheels i was wondering about stretching narrower tyres, it might look quite cool. Not sure what you can get away with though.