Poll

Paint her Rosso Scuro or Broom  Yellow?!

Rosso Scuro
7 (46.7%)
Broom yellow
8 (53.3%)

Total Members Voted: 15

Voting closed: December 30, 2007, 05:08:57 PM

Author Topic: The arrival of a new project....  (Read 13863 times)

0 Members and 2 Guests are viewing this topic.

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« on: December 30, 2007, 05:08:57 PM »


Yes, it's in a Fiat Ducato....  :shock:



Seriously!!:lol:



In her new home!!



With her new sister..... :wink:

Here is my new project, many of you will recognise her as Beryl! I picked her up today. The plan is to take out all the glass etc and have her resprayed. I will do as much of the prep work as I can at home (ie, sanding, filling, treating rust) before putting her back in the van to take her to the paint shop, where I will weld and paint her. Don't worry, she's staying her beautiful brown colour. It was suggested I paint her broom yellow and show her and the seicento as a pair but....... Im not convinced!!! What does any one else think??

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
The arrival of a new project....
« Reply #1 on: December 30, 2007, 07:23:06 PM »
Yellow is good. Pleased she made it back in 1 peice. Hope you are happy with her, Please it went to a good home.

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #2 on: December 30, 2007, 08:13:58 PM »
I'm very happy with her  :D

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #3 on: December 31, 2007, 04:54:57 PM »
soooo......
Day 2:
Here's what we have to work with......:lol:








Just a little rustier than we'd hoped........:shock:

Tomorrows jobs: strip doors and finish re-assembling engine after replacing cables. Then plate welding, filling and sanding.... woohoo.
Wheels are off to have tyres removed, them they will be sanded (by hand :lol: ) and resprayed...

watt

  • Member
  • *
  • Posts: 20
  • Karma: 0
The arrival of a new project....
« Reply #4 on: December 31, 2007, 07:48:20 PM »
erm, trying to rescue a bis from noth london but dan't have a trailes.
so the question is:-
did you transport beryl in a transit? was it easy to get in/out?
thanx
watt

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #5 on: January 01, 2008, 12:52:07 PM »
This was a fiat ducato with floor width of 1400mm (measured between the wheel arches), and a length of 3200mm. We used two 8ft scaffold planks to push her in as she didn't run, but you could always drive in sloooooowly. You would need at least 3 people as we had 1 pushing, one steering and one spotting. Getting her out was a doddle, but make sure the brakes work first :shock: The hardest bit will be getting in/out of the car once its in the van. The best bit about the ducato is it has one of those big sliding doors on the side so we put her in backwards so the doors lined up  :D

At least they're light (450kg). Load weight of the ducato was 1ton....  :lol:

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #6 on: January 06, 2008, 06:10:43 PM »
Well, it has been an eventful weekend what with the engine and gearbox coming out! I've decided to leave them out for now and spray the engine bay black  :lol: that way it doesn't matter what colour pipes i put on the engine, it wont clash!! (Brown clashes with e-v-e-r-y-t-h-i-n-g...)  :cool:
If you want to see the pictures i now have a photobucket thingumy...
 :P
http://s248.photobucket.com/albums/gg188/claire126sei/

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #7 on: January 06, 2008, 06:47:58 PM »

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
The arrival of a new project....
« Reply #8 on: February 10, 2008, 11:00:49 AM »
Whats the latest?

Did you get the Alloys blasted?

Is she ready for paint??

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #9 on: February 12, 2008, 10:27:33 AM »
I have sprayed a lacquered the engine bay in black so that it will look good with coloured pipework. I was hoping to put the engine back in this weekend, but ended up lowering my seicento...  :roll:

She should be going for paint this week all being well. I guess this will take around a month to complete as I am only allowed in on saturdays to do the prep!! The plan is to take her over without the engine in inside the big white van  :lol:

She's going to stay brown  :D I've decided to re-cover the interior in cream leather to contrast with the rown exterior.

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
The arrival of a new project....
« Reply #10 on: March 02, 2008, 10:00:25 AM »
Ready yet??

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #11 on: March 02, 2008, 06:22:32 PM »
She is complely stripped down now. Has taken longer than it should have done as she didn't get to the workshop til this weekend. Im going to sand her next week and hopefully she'll have all her paint work done by the following weekend ready to come home for the engine and gearbox to go back in  :D

The other thing that slowed proress down is the other half bought another 126. It's an old R-reg that someone's messed about with. His plan is that one will be yellow, lowered and have a sound system... hmmm.... :shock:

claire

  • Member
  • *
  • Posts: 56
  • Karma: 0
The arrival of a new project....
« Reply #12 on: March 17, 2008, 09:47:19 PM »


Here are some pictures of the work that has taken place so far... she was painted at the weekend. I decided on brown as the other half wants to paint his yellow to match my seicento...  :shock:

Gordan

  • Subscribers
  • Super Member
  • ****
  • Posts: 1689
  • Karma: 8
The arrival of a new project....
« Reply #13 on: March 17, 2008, 10:22:46 PM »
I think its quite wonderful that so much time and effort has been put into this little car... well done, most cars in the state that yours was would probably be scrapped, so once again, wery nicely done, congrats... :smt023
(i now see what you guys, and gals have to work with over there, the car that i wanted to buy for parts was in a far better shape than this brown 126 but will probably be sent to the big parking lot in the sky cos folk over here dont think theyre worth the effort  :cry: )
PLEASE FOLLOW MY PROGRESS ON IG: https://www.instagram.com/fiatbis/

dajwid

  • Subscribers
  • Super Member
  • ****
  • Posts: 2932
  • Karma: 14
The arrival of a new project....
« Reply #14 on: April 14, 2008, 07:38:49 PM »
(most cars in the state that yours was would probably be scrapped)

 :lol:

Bloody cheek, it was a great little car. :D

In Poland a really decent 126 is already demaning £1000 - £1500

Sadly as you say people still look down on them, it is changing very fast. Get one while you can.

I am still busy having a 1.2 aircooled engine squeezed into a 126.
Mechanic is having more trouble than expected :cry: