Author Topic: New Member Questions! (Read 10219 times)

b3ardyuk · « **Reply #15 on:** August 27, 2005, 09:26:13 PM »

What size alloy wheel are people putting on there Fiat 126?

As I am looking round at fiat uno alloys, but they are 14". They seem too big.

Plus how much for buckets seats (plus the brackets)? As I am 6ft 2" and I don't think I will be able to drive one.

I was reading something about a 6ft 3" driving one with the sun roof open and his head poping out.

John

paul harbinson. · « **Reply #16 on:** August 29, 2005, 07:41:36 AM »

Thats the strangest thing I was looking at Uno turbo wheels yesterday,bads news is they're too wide.The widest I ever put on a 126 was 13x5 the Uno ones are 5.5 inch :roll: But here if anyone knows better let me know as there is a set here that I could use (on a perminant loan basis of course)

slater · « **Reply #17 on:** August 29, 2005, 09:32:26 AM »

Im 6ft 3" and can fit in fine. My feet are a bit tight tho! (im only size 10)

Bucket seats range from ~?100 each for crap ones to ~?300 for 'as good as you need for a road car' ones. Be careful that you measure first tho 126's are quite small if you havent allredy noticed! :roll:

You can adapt Uno disc brakes to fit if your clever

I could make some ally drums but its a waste of money imo

b3ardyuk · « **Reply #18 on:** August 29, 2005, 11:41:07 AM »

Your feet are a bit tight. I am size 13!
I will have to see if I can fit in one before I buy then.

John

b3ardyuk · « **Reply #19 on:** August 29, 2005, 02:34:50 PM »

http://www.preloved.co.uk/fuseaction-adverts.showadvert/index-251782/0fd9e4de.html

I am going for this. I have rang him and he says that the front valance and battery compartment need replacing.

Where do I get the replacements and for how much? Its J reg.

John

slater · « **Reply #20 on:** August 29, 2005, 08:24:58 PM »

Ive got a Genuine fiat front panel forsale (to fix the valance) im asking about ?40ono due to there rearity and the possibility that i will need to use one myself one day!

slater · « **Reply #21 on:** August 29, 2005, 08:32:21 PM »

you can also get pattern panels from here http://www.carpanels.co.uk/index_catalogues.htm

You can get them fron germany here

https://ssl.kundenserver.de/shop.fiat500126.de/indexa.htm

(looks uber cheap but im not sure if it works out that way in the long run)

b3ardyuk · « **Reply #22 on:** August 29, 2005, 09:11:23 PM »

I thought the 126 BIS part would be east to get and cheap. As its not that old.

I am looking at the diagrams for the battery holder, and it seems that part will be expensive and hard to do (I don't plan on doing the welding).

John

b3ardyuk · « **Reply #23 on:** September 01, 2005, 05:48:33 PM »

http://cgi.ebay.co.uk/1986-FIAT-126-BROWN-WHITE_W0QQitemZ4572796621QQcategoryZ9843QQrdZ1QQcmdZViewItem

This is a aircooled one, isn't it?

Just noticed it got no MOT, and your not able to view before buying. Sounds dodgy.

John

slater · « **Reply #24 on:** September 01, 2005, 10:08:53 PM »

Quote

YOU CAN VIEW BEFORE AUCTION ENDS

you misread

yeh its aircooled (hence good)

b3ardyuk · « **Reply #25 on:** September 01, 2005, 10:12:41 PM »

I think hes changed it. I sware it said, you are biding to buy not to view before the auction ends.

John