Author Topic: Suitable Alloy Wheel Donors????? (Read 6802 times)

Fiat 126 ZZR!! · « **on:** August 28, 2007, 11:53:48 AM »

Hi all,
I am looking to change the rather plain looking steels for some alloy wheels, what car would be a suitable donor for alloys, either 13in or bigger? Also, pcd? would be helpful and how wide etc, thanks, ps was thinking fiat punto might fit? If not, there are a set of 1995 cinquecento sporting alloys locally going cheap.

Dom · « **Reply #1 on:** August 28, 2007, 12:04:45 PM »

PCD is 4 x 98mm.
Think Punto alloys may be too big,, but cinq and Seicento will fit.
As for swapping the engine and any other extensive mods, use the search facilitly to look over some previous threads on this topic as it is often discussed, but rarely carried out.

ciaoflyer · « **Reply #2 on:** August 28, 2007, 12:51:31 PM »

Hi

What car have you got? I have some alloys I want to sell, they have Brand new tyres fitted. They are 13". Let me know and I will post a pic!

meuton · « **Reply #3 on:** August 28, 2007, 12:51:59 PM »

maximum width if correct offset which a cannot remember off hand would be 13 X 6.5 fitted with 175 X 50 X 13 tyres otherwise Cinq wheels with 155 X 55 X 13 will fit straight on. so depends on the look you want but most Lancia, fiat, alfa wheels in 13" will bolt onto a 126 but you may need to use 10mm spacers on the back with some to clear the inner arch. If you look in the garage section you will see lots of 126's with differetn options of alloys, 126dave has nice Mag cromadora alloys, I have 6" speedlines on mine with 165x60x13" on currently but i have 6.5"x13" Braid Split rims with 175x50x13 A008 Yoko's to go on, So have a look see what you fancy.

cheers Doug

Fiat 126 ZZR!! · « **Reply #4 on:** August 28, 2007, 06:55:32 PM »

Thanks Guys, my 126 is a 1990 BIS model, would like to see a pic of wheels? Cheers.

Bruce · « **Reply #5 on:** August 28, 2007, 11:24:51 PM »

mine with cinque alloys and 165x55x13 tyres;

click on the picture to open a bigger pic in a new window

Fiat 126 ZZR!! · « **Reply #6 on:** August 29, 2007, 07:56:36 AM »

Quote from: "Bruce"

mine with cinque alloys and 165x55x13 tyres;

click on the picture to open a bigger pic in a new window

They look pretty cool! They are the same ones that I am chasing at the moment, might well go for them, I take it I need alloy wheel nuts?

ciaoflyer · « **Reply #7 on:** August 29, 2007, 09:34:09 PM »

These are the alloys I have for sale, the tyres are all brand new, you do need to use spacers on the rear to avoid fouling but they come with them and extra long wheel nuts!

Bruce · « **Reply #8 on:** August 30, 2007, 03:18:22 PM »

I used the standard 126 wheels bolts, i got the cinc one with the wheels but they had the wrong thread.

the wheels fit straight on without spacers and the wheel bolts can be stood on to do them up so they should be safe. i believe a few others have used the standard bolts with alloys without problem.

ciaoflyer · « **Reply #9 on:** August 30, 2007, 07:21:46 PM »

Hi
Anyone interested in the alloys otherwise it's Ebad!

stuey · « **Reply #10 on:** August 30, 2007, 10:08:37 PM »

price?

Fiat 126 ZZR!! · « **Reply #11 on:** August 31, 2007, 12:21:56 PM »

Quote from: "stuey"

price?

Hi Stuey,
you are just up the road from me! I am in Lowestoft, good to another 126 fan close to hand lol!

ciaoflyer · « **Reply #12 on:** August 31, 2007, 04:06:36 PM »

Ã‚Â£125 ONO, Brand new tyres.

Fiat 126 ZZR!! · « **Reply #13 on:** August 31, 2007, 09:44:29 PM »

Quote from: "ciaoflyer"

Ã‚Â£125 ONO, Brand new tyres.

Be nice on mine but how far from Lowestoft? Bet postage would be high!

Bruce · « **Reply #14 on:** August 31, 2007, 09:49:28 PM »

what size tyres?